Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Lowrance XT-10BLK 10ft 9 pin 9 pin extension cable

$91.00

A 10 ft (3 m) Lowrance extension for 9-pin transducers, for when the transducer cable falls a few feet short of the display. Use only one extension per install. Model 000-00099-006.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

When a transducer cable ends a few feet short of the display, the Lowrance XT-10BLK extension cable is the fix. It adds 10 ft (3 m) between a 9-pin transducer and the display, and Lowrance’s part number is 000-00099-006. Lowrance’s one rule for it: for best performance, don’t use more than one extension per installation.

When you’ll need it

  • A transducer on the trolling motor: the run from the bow back to a console display is often longer than the cable that came on the transducer.
  • A display that moved: you relocated the graph and the old cable doesn’t reach.
  • A long route: the cable has to go around a livewell or through a rigging tube instead of straight across.

Transducer cable lengths vary by model, and a route along the gunwale is almost always longer than it looks. Run a string along the path before you start.

Measure the actual route before ordering. If the gap is more than 10 ft, the one-extension rule means you should rethink the route or the transducer, not add a second cable.

What it connects

The Lowrance XT-10BLK extension cable is listed for 9-pin transducers, which includes the 9-pin in-hull skimmer and the 9-pin trolling motor transducer we sell. It doesn’t change the plug type, so it won’t connect a 7-pin transducer to a 9-pin display; that’s a job for the 7-pin to 9-pin adapter cable.

If you’re extending an Active Imaging transducer, email us first and we’ll confirm it’s the right extension for that model.

Installing a 9-pin transducer extension

  • Make the connection dry, and hand-tighten the collar fully.
  • Keep the joint up off the floor and out of the bilge where water collects.
  • Support both sides of the joint with ties so the plug isn’t carrying the weight of the cable.
  • Don’t cut or splice the transducer cable to make it reach. An extension keeps both factory plugs intact.

For a refresher on how the transducer and display work together, the fishfinder overview on Wikipedia is a good plain read.

Lowrance XT-10BLK extension cable questions

Can I use two of them for 20 ft?

Lowrance advises against it. More than one extension can hurt sonar performance.

Will one extension weaken my sonar?

One 10 ft extension is within what Lowrance allows. Keep the joint clean and dry, because a loose or corroded connection tends to show up as screen noise or a lost bottom reading.

What’s the Lowrance part number?

Lowrance lists it as 000-00099-006, sold under the name XT-10BLK.

Is it returnable?

Cables count as electronics here, so it’s final sale (see returns).

Email sales@trollingmotorsdirect.org with your transducer and display models and we’ll confirm the Lowrance XT-10BLK extension cable is the right part. More parts are in Lowrance transducers.

error: Content is protected !!