Description
Every device on a Lowrance NMEA 2000 network joins through a tee, and the Lowrance N2K-T-RD tee connector is the one for the red Lowrance network. Two of its ports carry the backbone through, and the third takes a device or its drop cable. Lowrance describes it as a Micro-C T-connector.
How a tee fits into the backbone
Picture the backbone as a chain of tees joined by cables, with a terminator capping each end. The straight-through ports pass the data and power along the chain. The side port is where a display, GPS antenna, sensor or power node connects. One device per side port, so the number of tees you need equals the number of devices, power node included.
The side port takes a device directly or through a drop cable, so the device doesn’t have to sit right at the tee. A sensor a few feet away connects with a short drop, and the tee stays in a dry spot with the rest of the backbone.
Tees can plug directly into each other when devices sit close together, which makes a tidy bank under a console. Where they’re spread out, join them with an extension cable such as the 2 ft N2KEXT-2RD.
When you’ll need another Lowrance N2K-T-RD tee connector
- Adding a sensor: a heading sensor, engine interface or anything else that talks NMEA 2000.
- Adding a display: each display on the network gets its own tee.
- Planning ahead: one spare tee in the backbone makes the next install a plug-in job instead of a rebuild.
The Point-1 GPS antenna comes with one N2K-T-RD in the box, and the N2K-EXP-RD-2 starter kit includes two.
Install tips
- Mount each Lowrance N2K-T-RD tee connector up off the floor, where bilge water and wash-down water can’t sit on it.
- Hand-tighten each collar until it seats. A half-threaded collar is a common cause of a device dropping off the network.
- Label each drop at the tee so you know which cable goes where when something needs tracing later.
For how backbones, drops and terminators work together, see this NMEA 2000 overview.
Lowrance N2K-T-RD tee connector questions
How many tees do I need?
One Lowrance N2K-T-RD tee connector per device, plus one for the power node. Count everything you plan to add over the next season or two, then add a spare.
Does a tee need its own power?
No. Power comes along the backbone from the power node.
Can two devices share one tee?
No. The side port serves one device. Add another tee for the second one.
Is it returnable?
It’s an electronics part, so it’s final sale (see returns).
Not sure how many tees your boat needs? Email sales@trollingmotorsdirect.org with a list of your devices and we’ll count them up with you. More network parts are in Lowrance graph accessories.









