Description
A Garmin Spy Pole on a non-Garmin motor needs a brace, and this adjustable spy pole stabilizer is built for it. Choose your motor from the option list: Minn Kota Ultrex, Ultrex Quest, Lowrance Ghost or Power-Pole ZR. Length adjusts from 9 1/2 to 14 1/2 inches center-to-center, which covers a wide spread of boats and rigging layouts.
Materials and hardware
Every adjustable spy pole stabilizer is machined and finished the same way, whichever motor option you pick:
- 6061 aluminum with a black powder-coat finish
- Stainless steel hardware, assembled with anti-seize so the stainless and the aluminum don’t weld themselves together in salt
- Split bushings and split collars, so it goes on and comes off without taking the rest of the rig apart
- Adjustable from 9 1/2 to 14 1/2 inches center-to-center
- Made in the USA
It attaches the same way as the other dog bone stabilizers in our transducer mount range. If you’ve fitted a dog bone stabilizer to a Live Sweep or MEGA 360 mount, this will feel familiar.
Picking the right motor option
| Option | Use it with |
|---|---|
| Ultrex | Minn Kota Ultrex |
| Ultrex Quest | Minn Kota Ultrex Quest, a different motor from the original Ultrex |
| Lowrance Ghost | Lowrance Ghost |
| Power Pole ZR | Power-Pole MOVE ZR |
The Ultrex and Ultrex Quest options aren’t interchangeable, so check the model on your motor before you choose. The stabilizer pairs with our Spy Pole mounts, which cover the same four motors and ship without a brace. Ghost owners can read more about that motor in our Lowrance Ghost guide.
Fitting the adjustable spy pole stabilizer
Hang the pole on its mount first and set the shaft depth you’ll actually fish at. Then measure between the two attachment points, center to center. If the number lands between 9 1/2 and 14 1/2 inches, you’re in range.
Open the split collars, fit them at the attachment points for your motor option, and set the length so the stabilizer sits without pushing or pulling on the pole. Snug the hardware, turn the pole through its full rotation, then stow and deploy the motor to check nothing binds. Recheck everything after the first day on the water.
Garmin requires a dogbone brace on Spy Pole whenever two transducers are on the pole, and its own version is made for Force and Force Pro. On the four motors above, this stabilizer fills that role. Garmin’s Spy Pole overview explains the control modes if the pole is new to you.
Common questions
Do I need it with only one transducer on the pole?
Garmin only makes a brace mandatory with two transducers. We’d still fit one, because a single transducer on a long pole puts plenty of load on the mount in rough water.
Will the adjustable spy pole stabilizer fit a Garmin Force?
It’s built for the four motors in the option list. For Force and Force Pro, Garmin’s own dogbone stabilizer is the matching part.
Is it returnable if it doesn’t fit?
Unused non-electronic parts can be returned within 30 days under our returns policy. Orders of $199 or more ship free by ground to the lower 48 and DC.
Send your motor model and a photo of your Spy Pole setup to sales@trollingmotorsdirect.org and we’ll confirm the right option. More pole hardware is in our Spy Pole category.












