Description
The telescoping short swivel double bridge combo puts two graphs on our short telescoping swivel mount and sets the whole thing on a bridge over your trolling motor foot pedal. The bridge adaptor plate that joins mount and bridge is in the kit, so the two bolt together without any extra brackets.
What you’re ordering
Three parts make up the telescoping short swivel double bridge combo: the short swivel double mount, a bridge, and the bridge adaptor plate. You pick the bridge style and its leg height from the two drop-downs, which is where the 28 combinations come from.
The mount swivels at the base for sun glare or position, telescopes up and down for height, and the telescoping tube comes off the base. The mounting plates fit all graphs except the Helix 7, which needs the Helix 7 adapter bracket, sold separately.
Bridge choices
| Bridge | Foot pedal span | Where the mount sits |
|---|---|---|
| Bridge Extender | 11″ | Middle of the bridge |
| Bridge Extender (standard) | 13″ | Middle of the bridge |
| Bridge Extender (SeaArk Flex) | 15″ | Middle of the bridge |
| Bridge Extender | 16″ | Middle of the bridge |
| Bridge Extender | 19″ | Middle of the bridge |
| Offset Bridge | 13″ | Port or starboard side |
| Bridge FWN | 13″ | Mount on one side, single-graph gimbal plate on the other |
The foot pedal span is the opening under the bridge where your trolling motor pedal sits. Measure your pedal at its widest point, including the cord where it leaves the side, and pick a span that clears it with room for your foot.
The FWN layout makes room for a third screen: the double mount on one side and a gimbal plate for a single graph on the other. It’s the setup seen on Fishing with Nordbye.
Leg height and the ruler photos
On the telescoping short swivel double bridge combo, bridge legs come in 5, 6, 7 or 8 inches. Five inches is the standard leg height, and it’s what you see in the gallery photos with a ruler. Taller legs raise everything by the difference: a 7-inch leg puts the screens 2 inches higher than the photos show, and an 8-inch leg adds 3.
More leg height gives a big pedal extra room underneath and lifts the screens toward eye level. Less keeps the setup low and compact.
Installing the telescoping short swivel double bridge combo
Deck mounting hardware isn’t included, and all bolts on the mount are stainless steel Allen head. The mount is CNC machined aluminum with a black anodize finish, made in the USA.
On an aluminum deck we’d add a Bridge Under Plate to cut down flex. Two graphs on a telescoping tube put a lot of load on a thin deck. Before you drill, set the bridge over the pedal, sit or stand where you run the motor, and work the pedal through its full travel. That goes for Minn Kota pedals and every other brand.
If you don’t need a bridge, the telescoping short swivel double mount on its own bolts straight to the deck.
Questions
Does the telescoping short swivel double bridge combo include the bridge adaptor plate?
Yes. The plate that joins the mount to the bridge is part of the kit.
How tall will it be with 7-inch legs?
Take the heights in the ruler photos and add 2 inches.
Can I take the screens off the boat?
Yes. The telescoping tube comes off the base, so the tube, plates and graphs can go home with you.
See all our bridge mounts, or send your boat, trolling motor and pedal measurement to sales@trollingmotorsdirect.org and we’ll help you choose the bridge and leg height.



















