Description
Built for the Minn Kota Terrova, the Live Sweep for Terrova is a 12 volt arm that mounts on the shaft and rotates your live sonar transducer through 320 degrees, so the motor can hold its spot while you look around. A foot pedal and a wireless fob do the turning. You pick the shaft length and pedal type, and it arrives set up for the Terrova rather than as a universal kit you have to adapt.

Check your Terrova first
This one does not fit the Terrova Quest. The Quest is a different motor, so check the name on your head unit or the motor label before ordering. If you aren’t sure which generation you have, Minn Kota’s trolling motor lineup shows the current models side by side.
The transducer mount on the arm is designed for Garmin, Lowrance and Humminbird live sonar, so it works with LiveScope, ActiveTarget and MEGA Live style transducers. Tell us your exact model if you want it confirmed.
Live Sweep for Terrova options
- Shaft length: 45″, 54″, 60″, 72″ or 87″. Match your Terrova’s shaft.
- Wired pedal: plugs in and works, with nothing to charge.
- Wireless pedal: extra-cost upgrade that clears a cord off the deck.
- Fob: a wireless remote fob is included on every model.
Setting it up
The arm runs on 12 volts, so you’ll want a fused 12V lead at the bow. Route the cables so nothing pinches when the Terrova stows and deploys, and cycle the motor a few times before you tie everything down. Then run the arm through its full travel at the dock and watch the transducer cable as it turns.
If you run Humminbird MEGA Live, the molded cable holders on that cable make the Live Sweep hose pucker. Wrap black electrical tape around the hose at each holder. Our MEGA Live guide covers the rest of that system.
The directional arrow doesn’t light up, so it’s a daylight reference. If you want a brighter target, the high visibility arrow kit swaps in a bright green arrow. The full range of arms and spares is under Live Sweep mounts and parts.
Terrova questions
Is the Live Sweep for Terrova the same as the Ultrex version?
No. Ultrex, Fortrex and Maxxum use the Live Sweep with mounting hardware. This listing is Terrova only.
Will it fit a Riptide Terrova?
The listing is written for the Terrova and excludes the Terrova Quest. For a Riptide, email us your model and shaft length so we can check before you buy.
Do I need the wireless pedal to use the fob?
No. The fob is included with both pedal options.
Email sales@trollingmotorsdirect.org with your Terrova year, shaft length and transducer, and we’ll confirm the Live Sweep for Terrova fit before it ships.









