Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Furuno AIR-033-333 Transducer Pigtail 10-Pin for DFF1 ETR 6/10 Etc *NEW*

$71.99

The Furuno AIR-033-333 is a 10-pin transducer pigtail cable for Furuno sounders such as the DFF1 and ETR 6/10. It’s new. What you get (1) Furuno AIR-033-333 transducer pigtail, 10-pin. Condition: new. What the Furuno AIR-033-333 does A pigtail has the sounder-side connector on one end and bare wires on the other. It’s used to connect a transducer that doesn’t have the right plug, for example a transducer bought for another brand, a bare-wire Airmar transducer, or one whose connector was cut off during installation. Matching the wires to Furuno’s 10-pin pinout lets the DFF1 or ETR drive the transducer…

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

The Furuno AIR-033-333 is a 10-pin transducer pigtail cable for Furuno sounders such as the DFF1 and ETR 6/10. It’s new.

What you get

  • (1) Furuno AIR-033-333 transducer pigtail, 10-pin.
  • Condition: new.

What the Furuno AIR-033-333 does

A pigtail has the sounder-side connector on one end and bare wires on the other. It’s used to connect a transducer that doesn’t have the right plug, for example a transducer bought for another brand, a bare-wire Airmar transducer, or one whose connector was cut off during installation. Matching the wires to Furuno’s 10-pin pinout lets the DFF1 or ETR drive the transducer properly. Airmar publishes wiring cross-reference guides at Airmar, or see Furuno.

See more transducer cables and wiring adapters.

Before you install

  • Check your sounder uses the 10-pin connector.
  • Get the wiring diagram for your transducer.
  • Solder and heat-shrink each splice.
  • Keep the splice dry and supported.
  • Test the sounder before final routing.

Furuno AIR-033-333 questions

Is it new?

Yes.

Do I need to splice it?

Yes, the transducer end is bare wire.

Why shop surplus and closeout parts

Surplus, closeout and new old stock parts let you repair or upgrade a boat for less than the cost of new equipment, and they keep useful gear out of the scrap pile. The Furuno AIR-033-333 is one of many hard-to-find parts we’ve collected from dealers, distributors and refits. Stock is limited, and once it’s gone we may not be able to get another one, so it’s worth ordering a spare when you find the part you need.

How we source and check our stock

Much of what we sell comes from dealer closeouts, installer inventories and boats being refitted with new electronics. Every Furuno AIR-033-333 listing is photographed as the actual item or a matching unit, and we describe the condition as plainly as we can, including scuffs, missing parts and whether it has been tested. If something in the photos or the description isn’t clear, ask us before you buy. We would rather answer a question than handle a return.

Buying older marine electronics with confidence

Older and discontinued parts keep a lot of boats running, but fit matters. Before you buy the Furuno AIR-033-333, compare part numbers, connectors and model names with what’s on your boat, and check the photos closely. We list what is included and what isn’t, and we note condition honestly. If you’re unsure whether it will work with your setup, send us your equipment list and we’ll help you check.

Shipping, returns and warranty

Shipping is free to the contiguous United States (lower 48). Hawaii, Alaska, Puerto Rico, other US territories and international orders have shipping calculated at checkout. Every order comes with 30-day returns and a 90-day warranty.

Questions about the Furuno AIR-033-333? Email sales@trollingmotorsdirect.org with your equipment details and we’ll help you check fit before you order.

Additional information

Location

1017103

error: Content is protected !!