Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Airmar MM-10NS Northstar 10-Pin Mix and Match Cable – NEW for 600w Transducers

$66.99

The Airmar MM-10NS is a Mix and Match transducer cable with a Northstar 10-pin connector. It’s for 600W transducers and carries depth and temperature only. It’s new old inventory from a distributor that was liquidating excess stock. What you get (1) Airmar MM-10NS Mix and Match cable, Northstar 10-pin. Condition: new old stock. Why use the Airmar MM-10NS Airmar’s Mix and Match system pairs a transducer with a standard connector and a cable with the plug for your sounder brand. The MM-10NS connects a compatible 600W Airmar transducer to a Northstar sounder with a 10-pin port. If you’re keeping a…

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

The Airmar MM-10NS is a Mix and Match transducer cable with a Northstar 10-pin connector. It’s for 600W transducers and carries depth and temperature only. It’s new old inventory from a distributor that was liquidating excess stock.

What you get

  • (1) Airmar MM-10NS Mix and Match cable, Northstar 10-pin.
  • Condition: new old stock.

Why use the Airmar MM-10NS

Airmar’s Mix and Match system pairs a transducer with a standard connector and a cable with the plug for your sounder brand. The MM-10NS connects a compatible 600W Airmar transducer to a Northstar sounder with a 10-pin port. If you’re keeping a Northstar system running, it’s a way to fit a new transducer without rewiring. See Airmar for compatibility.

See more transducer cables and wiring adapters.

Before you install

  • Check your transducer is a 600W Mix and Match model.
  • Check your Northstar unit uses the 10-pin port.
  • Remember speed isn’t supported.
  • Route away from engine wiring.
  • Test depth and temperature.

Airmar MM-10NS questions

Does it carry speed?

No, depth and temperature only.

Will it work with 1kW?

No, 600W only.

How we source and check our stock

Much of what we sell comes from dealer closeouts, installer inventories and boats being refitted with new electronics. Every Airmar MM-10NS listing is photographed as the actual item or a matching unit, and we describe the condition as plainly as we can, including scuffs, missing parts and whether it has been tested. If something in the photos or the description isn’t clear, ask us before you buy. We would rather answer a question than handle a return.

Buying older marine electronics with confidence

Older and discontinued parts keep a lot of boats running, but fit matters. Before you buy the Airmar MM-10NS, compare part numbers, connectors and model names with what’s on your boat, and check the photos closely. We list what is included and what isn’t, and we note condition honestly. If you’re unsure whether it will work with your setup, send us your equipment list and we’ll help you check.

Why shop surplus and closeout parts

Surplus, closeout and new old stock parts let you repair or upgrade a boat for less than the cost of new equipment, and they keep useful gear out of the scrap pile. The Airmar MM-10NS is one of many hard-to-find parts we’ve collected from dealers, distributors and refits. Stock is limited, and once it’s gone we may not be able to get another one, so it’s worth ordering a spare when you find the part you need.

Shipping, returns and warranty

Shipping is free to the contiguous United States (lower 48). Hawaii, Alaska, Puerto Rico, other US territories and international orders have shipping calculated at checkout. Every order comes with 30-day returns and a 90-day warranty.

Questions about the Airmar MM-10NS? Email sales@trollingmotorsdirect.org with your equipment details and we’ll help you check fit before you order.

Additional information

Location

1006404

error: Content is protected !!