Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Airmar Garmin Furuno NOS 10 Pin to 6 Pin Transducer Adapter Cable ADAPT-10-6DTV2

$99.99

The Airmar ADAPT-10-6DTV2 is a transducer adapter cable that connects an older Furuno 10-pin depth/temperature or depth/speed/temperature transducer to a Garmin 6-pin connector. It’s new old stock. It’s not for depth-only transducers such as the M260 or P79. What you get (1) Airmar ADAPT-10-6DTV2 adapter, Furuno 10-pin to Garmin 6-pin. Condition: new old stock. Why use the ADAPT-10-6DTV2 If you’re replacing a Furuno sounder with a Garmin unit, this adapter lets you keep your existing Furuno-wired transducer, saving the cost of a new transducer and a haul-out. It passes depth and temperature (and speed where supported) through to the Garmin.…

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

The Airmar ADAPT-10-6DTV2 is a transducer adapter cable that connects an older Furuno 10-pin depth/temperature or depth/speed/temperature transducer to a Garmin 6-pin connector. It’s new old stock. It’s not for depth-only transducers such as the M260 or P79.

What you get

  • (1) Airmar ADAPT-10-6DTV2 adapter, Furuno 10-pin to Garmin 6-pin.
  • Condition: new old stock.

Why use the ADAPT-10-6DTV2

If you’re replacing a Furuno sounder with a Garmin unit, this adapter lets you keep your existing Furuno-wired transducer, saving the cost of a new transducer and a haul-out. It passes depth and temperature (and speed where supported) through to the Garmin. See Airmar for adapter charts.

See more transducer cables and wiring adapters.

Before you install

  • Check your transducer is a 10-pin depth/temp or depth/speed/temp model.
  • Don’t use it with depth-only transducers.
  • Confirm your Garmin has a 6-pin port.
  • Keep the joint dry.
  • Set the transducer type in the Garmin menu.

ADAPT-10-6DTV2 questions

Will it work with an M260?

No, it’s not for depth-only transducers.

Is it new?

Yes, new old stock.

Buying older marine electronics with confidence

Older and discontinued parts keep a lot of boats running, but fit matters. Before you buy the ADAPT-10-6DTV2, compare part numbers, connectors and model names with what’s on your boat, and check the photos closely. We list what is included and what isn’t, and we note condition honestly. If you’re unsure whether it will work with your setup, send us your equipment list and we’ll help you check.

Why shop surplus and closeout parts

Surplus, closeout and new old stock parts let you repair or upgrade a boat for less than the cost of new equipment, and they keep useful gear out of the scrap pile. The ADAPT-10-6DTV2 is one of many hard-to-find parts we’ve collected from dealers, distributors and refits. Stock is limited, and once it’s gone we may not be able to get another one, so it’s worth ordering a spare when you find the part you need.

How we source and check our stock

Much of what we sell comes from dealer closeouts, installer inventories and boats being refitted with new electronics. Every ADAPT-10-6DTV2 listing is photographed as the actual item or a matching unit, and we describe the condition as plainly as we can, including scuffs, missing parts and whether it has been tested. If something in the photos or the description isn’t clear, ask us before you buy. We would rather answer a question than handle a return.

Shipping, returns and warranty

Shipping is free to the contiguous United States (lower 48). Hawaii, Alaska, Puerto Rico, other US territories and international orders have shipping calculated at checkout. Every order comes with 30-day returns and a 90-day warranty.

Questions about the ADAPT-10-6DTV2? Email sales@trollingmotorsdirect.org with your equipment details and we’ll help you check fit before you order.

Additional information

Location

1006202

error: Content is protected !!