Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

License Plate Frame

$20.00

A black zinc alloy die cast license plate frame, laser marked with the logo and one of two tag lines: Shuckin’ Strong, or the version with USA Stuff. Pick from the drop-down.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

This fishing license plate frame is black zinc alloy, die cast, and laser marked with the logo and your pick of tag line. It’s a small way to show where your weekends go, on the truck that pulls the boat.

Tag line options

There are two versions of the fishing license plate frame:

  • Shuckin’ Strong
  • The USA Stuff version, which carries a second tag line along with USA Stuff

Both are in the photos, so you can see exactly what’s lasered on before you choose. Pick yours from the drop-down when you add it to the cart.

Die cast zinc alloy

Most cheap frames are thin plastic or stamped metal. This one is die cast from zinc alloy, a common die casting metal, so it’s heavier and stiffer than plastic and won’t go brittle in the sun. The logo and tag line are lasered on rather than printed, so there’s no sticker or ink to wear off.

Fitting a fishing license plate frame

A frame goes over the edges of your plate and is held by the same screws that hold the plate. A few things to check:

  • Plate size: if your plate isn’t the standard 6 x 12 inch US size, email us before ordering.
  • State rules: many states don’t allow a frame to cover the state name, registration stickers or plate numbers. Check yours before you fit it.
  • Screws: stainless plate screws won’t rust and stain the black finish.
  • Screw covers: if your plate screws have caps, check they still fit with the frame in place.

Tighten the screws evenly, a little at a time, so the frame sits flat against the plate. Overtightening one corner can bend a thin plate.

Who it’s for

The fishing license plate frame suits the truck that tows the boat, the car that gets you to the ramp at 5am, or a gift for whoever in the family does the most fishing. It’s a small touch that finishes off the back of a vehicle, and it takes five minutes and a screwdriver to fit.

Matching plate

For the front bracket or the shop wall, our fish logo license plate is black anodized aluminum, 6 x 12 inches. The two look right together. More small extras are in our accessories.

Questions

How many tag line choices does the fishing license plate frame have?

Two: Shuckin’ Strong, or the version with USA Stuff.

What is it made of?

Black zinc alloy, die cast.

Can I send it back?

Yes, if it’s unused and within 30 days. See our returns page.

Questions about the fishing license plate frame or anything else in the shop: email sales@trollingmotorsdirect.org.

Additional information

Tag Line

Shuckin' Strong, Cornfield Tough, USA Stuff

Related products

error: Content is protected !!