Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Bridge Mount – Scratch & Dent

Price range: $112.00 through $122.00

Our standard 1/2″ thick 6061 aluminum bridge with cosmetic finish flaws. 13″ inside, 5″ or 7″ legs, tapped for most graph mounts except Helix 7. Sold as is, final sale.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns
SKU: 94-SD
Category: ,

Description

Same thick bridge, rougher finish: this bridge mount scratch and dent unit is our standard bridge with marks on the surface. Underneath the blemishes it’s the same 1/2″ thick 6061 high strength aluminum, 13″ inside and 5″ tall on standard legs, tapped for most graph mounts. It’s sold as is, and there are no returns or refunds.

What kind of flaws to expect

The flaws are cosmetic and every piece is a little different. Your bridge may have one or more of these:

  • Scratches in the finish
  • Machining defects in the finish
  • Color defects
  • Nicks in the finish

We can’t pick which flaw you get. If you want a perfect surface, order the new bridge mount instead.

Bridge mount scratch and dent specs

ItemDetail
Material1/2″ thick 6061 high strength aluminum
Inside width13″
Height5″ with standard legs
Leg options5″ (standard) or 7″
Tapped forMost setups, except Helix 7
Deck hardwareNot included

Ruler photos show the 5″ legs. With 7″ legs, add 2″ to the total heights in those pictures.

Bridge mount scratch and dent unit in thick aluminum with standard legs

What it works with

It pairs with a double mount or a single deck mount. All of our machined mounts bolt to it directly except the telescoping deck mounts and the swivel telescoping mounts. The Helix 7 needs a separate adaptor plate.

The bridge gives taller mounts a sturdier, wider stance, which is why it’s worth having even when the screen is only a few inches off the deck. 6061 aluminum in a 1/2″ plate is stiff stuff, and a scratch in the finish doesn’t change that.

On an aluminum deck, add the Bridge Under Plate underneath to cut flex. Then bolt it down with hardware that suits your deck, and seal every hole.

Is the scratch and dent version a good buy?

For a working boat, usually yes. A bridge lives at your feet, gets stepped on, bumped by rods and hit with the pedal cord. Most new finishes pick up marks in the first season. If that doesn’t bother you, a bridge mount scratch and dent piece does the same job.

A simple test: if a new bridge picked up the same scratch on its first trip, would you send it back? If not, the bridge mount scratch and dent version is the smarter way to spend the money.

The catch is the return policy. Scratch and dent items are final sale, so check your leg height and pedal clearance before ordering.

Questions

Can I return a bridge mount scratch and dent item?

No. Scratch and dent parts are sold as is, final sale. See our returns policy.

Why only 5″ and 7″ legs?

Those are the leg heights we have listed in scratch and dent. For 6″ or 8″, order the new bridge.

Browse the rest of our scratch and dent parts, or email sales@trollingmotorsdirect.org with your pedal and mount details for help.

Additional information

Leg Height

5" (Standard), 7"

Related products

error: Content is protected !!