Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Over the Side Mt/Telescoping Swivel Mt Bridge Adaptor Deck Plate -SCRATCH AND DENT

$41.00

Bridge adaptor deck plate scratch and dent: a 4″ x 4″, 1/2″ black anodized plate that holds the Over the Side Mount base or our telescoping swivel mounts on a deck or bridge. Finish flaws, sold as is.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns
SKU: 572-1-2-SD
Category: ,

Description

This bridge adaptor deck plate scratch and dent piece is a 4-inch square, 1/2-inch thick plate that gives a swivel-base mount a permanent home on your deck or on a bridge. Something in the finish didn’t make the grade, so it’s sold as is. It works with three of our mounts, listed below.

Mounts it works with

The plate is threaded to hold those bases. It also doubles as an adaptor plate, so the two swivel mounts can sit on one of our bridges instead of straight on the deck.

Why bother with a deck plate

You fasten the plate down once. After that, the mount attaches to the plate, not the deck. When you take the mount off, only the 1/2-inch plate stays behind, which keeps the deck clear for storage, trailering or another setup.

It’s also handy if you move one mount between spots. Put a plate at each location and carry the over the side mount or swivel mount to wherever you’re fishing that day.

On a bridge, the plate is what lets a swivel base land on bridge holes it wasn’t drilled for. That’s the “bridge adaptor” part of the name.

Plate details

SpecDetail
Size4″ x 4″ square
Thickness1/2″
FinishBlack anodize (with cosmetic flaws)
IncludedStainless steel bolts to fix the Over the Side Mount base to the plate
ToolsStandard Allen wrenches

Fasteners for the deck itself aren’t listed, so have those ready. Any standard Allen (hex) key set covers the rest. Stainless deck hardware is the usual choice on a boat, and a little sealant in each hole keeps water out of the deck core.

Bridge adaptor deck plate scratch and dent seen from the top

Bridge adaptor deck plate scratch and dent terms

Expect one or more of these: scratches in the finish, machining marks in the finish, color defects or small nicks. Scratch and dent items are sold as is, with no returns or refunds, as set out in our return policy.

If you’d rather have a clean finish, the regular telescoping swivel bridge adaptor plate is the same idea without the blemish.

Questions

Does it fit the Over the Side Mount and the telescoping swivel mounts?

Yes. It’s threaded for the Over the Side Mount base and for both the Telescoping Swivel and Telescoping Short Swivel mounts.

Can I send back a bridge adaptor deck plate scratch and dent if the finish bugs me?

No. It’s a final sale item, so look over the flaw list above before ordering.

Will the marks affect how a bridge adaptor deck plate scratch and dent sits on the deck?

The flaws listed are all in the finish. If you have a specific concern, email us before you order.

Not sure it suits your deck or bridge? Email sales@trollingmotorsdirect.org with your boat and the mount you run.

Related products

error: Content is protected !!