Description
This 8-pin Fuji transducer connector is a new, solder-cup style connector used on several legacy sounders from Furuno, Raytheon, Sitex and Koden. To use it you’ll need the wiring schematic (available from Airmar’s cross-reference guide) and you’ll need to solder wires into the solder cups. Intermediate soldering skills and comfort reading schematics are a must.
What you get
- (1) 8-pin Fuji transducer connector
- Condition: new.
When you need an 8-pin Fuji transducer connector
If a transducer cable has been cut, or you’re fitting a bare-wire transducer to an older sounder with an 8-pin Fuji socket, a new connector lets you terminate the cable correctly. It’s often the cheapest way to get a working transducer back on an older unit. See Airmar for pinout references.
See more transducer cables and wiring adapters.
Before you install
- Find the right pinout for your sounder and transducer.
- Use a fine-tip iron and rosin-core solder.
- Slide the shell onto the cable before soldering.
- Check each pin for shorts with a meter.
- Seal the back of the connector.
8-pin Fuji transducer connector questions
Is it easy to install?
It needs intermediate soldering skills.
Is it new?
Yes.
How we source and check our stock
Much of what we sell comes from dealer closeouts, installer inventories and boats being refitted with new electronics. Every 8-pin Fuji transducer connector listing is photographed as the actual item or a matching unit, and we describe the condition as plainly as we can, including scuffs, missing parts and whether it has been tested. If something in the photos or the description isn’t clear, ask us before you buy. We would rather answer a question than handle a return.
Buying older marine electronics with confidence
Older and discontinued parts keep a lot of boats running, but fit matters. Before you buy the 8-pin Fuji transducer connector, compare part numbers, connectors and model names with what’s on your boat, and check the photos closely. We list what is included and what isn’t, and we note condition honestly. If you’re unsure whether it will work with your setup, send us your equipment list and we’ll help you check.
Why shop surplus and closeout parts
Surplus, closeout and new old stock parts let you repair or upgrade a boat for less than the cost of new equipment, and they keep useful gear out of the scrap pile. The 8-pin Fuji transducer connector is one of many hard-to-find parts we’ve collected from dealers, distributors and refits. Stock is limited, and once it’s gone we may not be able to get another one, so it’s worth ordering a spare when you find the part you need.
Shipping, returns and warranty
Shipping is free to the contiguous United States (lower 48). Hawaii, Alaska, Puerto Rico, other US territories and international orders have shipping calculated at checkout. Every order comes with 30-day returns and a 90-day warranty.
Questions about the 8-pin Fuji transducer connector? Email sales@trollingmotorsdirect.org with your equipment details and we’ll help you check fit before you order.



Raytheon G713039 Airmar 33-222-01 Transducer Pigtail Cable f/ L750
Humminbird EC-6 720006-6 10′ 2-Pin Transducer Extension Cable – *NEW OUT OF BOX*
Airmar MM-10FUR Furuno 10-Pin Mix and Match Cable – NEW for 600w Transducers



