Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Airmar/Garmin 6 Pin Transducer Mix & Match Cable 600w DEPTH ONLY MM-6DO

$39.99

The Airmar MM-6DO is a 25-foot Mix and Match transducer cable with a Garmin 6-pin style connector. It’s for depth only: it won’t show water temperature or speed. That makes it best suited to the P79 in-hull transducer, or any setup where you don’t need temperature or speed. It’s for 600W transducers only, not 1kW. What you get (1) Airmar MM-6DO Mix and Match cable, 25 ft, Garmin 6-pin, depth only. How the Airmar MM-6DO works Airmar’s Mix and Match system pairs a transducer that has a standard connector with a cable that has the plug for your brand of…

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

The Airmar MM-6DO is a 25-foot Mix and Match transducer cable with a Garmin 6-pin style connector. It’s for depth only: it won’t show water temperature or speed. That makes it best suited to the P79 in-hull transducer, or any setup where you don’t need temperature or speed. It’s for 600W transducers only, not 1kW.

What you get

  • (1) Airmar MM-6DO Mix and Match cable, 25 ft, Garmin 6-pin, depth only.

How the Airmar MM-6DO works

Airmar’s Mix and Match system pairs a transducer that has a standard connector with a cable that has the plug for your brand of fishfinder. That way one transducer can work with different displays just by changing the cable, which is handy when you replace a fishfinder with a different brand. The MM-6DO connects a compatible 600W Airmar transducer to a Garmin unit with a 6-pin port. See Airmar for compatibility charts.

See more transducer cables and wiring adapters.

Before you install

  • Check your transducer is a 600W Mix and Match model.
  • Confirm your Garmin uses the 6-pin connector.
  • Remember you won’t get temperature or speed.
  • Route the cable away from engine wiring.
  • Coil extra cable loosely.

Airmar MM-6DO questions

Will it show water temp?

No, depth only.

Will it work with a 1kW transducer?

No, 600W only.

Buying older marine electronics with confidence

Older and discontinued parts keep a lot of boats running, but fit matters. Before you buy the Airmar MM-6DO, compare part numbers, connectors and model names with what’s on your boat, and check the photos closely. We list what is included and what isn’t, and we note condition honestly. If you’re unsure whether it will work with your setup, send us your equipment list and we’ll help you check.

Why shop surplus and closeout parts

Surplus, closeout and new old stock parts let you repair or upgrade a boat for less than the cost of new equipment, and they keep useful gear out of the scrap pile. The Airmar MM-6DO is one of many hard-to-find parts we’ve collected from dealers, distributors and refits. Stock is limited, and once it’s gone we may not be able to get another one, so it’s worth ordering a spare when you find the part you need.

How we source and check our stock

Much of what we sell comes from dealer closeouts, installer inventories and boats being refitted with new electronics. Every Airmar MM-6DO listing is photographed as the actual item or a matching unit, and we describe the condition as plainly as we can, including scuffs, missing parts and whether it has been tested. If something in the photos or the description isn’t clear, ask us before you buy. We would rather answer a question than handle a return.

Shipping, returns and warranty

Free shipping in the United States. International orders can take up to 6 weeks. 30-day returns and a 90-day warranty.

Questions about the Airmar MM-6DO? Email sales@trollingmotorsdirect.org.

Additional information

Location

1030173

error: Content is protected !!