Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Airmar MM-10FUR Furuno 10-Pin Mix and Match Cable – NEW for 600w Transducers

$75.99

The Airmar MM-10FUR is a 25-foot Mix and Match transducer cable with a Furuno 10-pin connector. It’s new. It’s for 600W transducers only, not 1 kW. What you get (1) Airmar MM-10FUR Mix and Match cable, 25 ft, Furuno 10-pin. Condition: new. Why use the Airmar MM-10FUR With Airmar’s Mix and Match system, a transducer with the standard Mix and Match connector can be paired with a cable for any brand. The MM-10FUR connects a 600W Airmar transducer to a Furuno sounder with a 10-pin port. If you’re switching to Furuno, or replacing a damaged cable, you keep the transducer…

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

The Airmar MM-10FUR is a 25-foot Mix and Match transducer cable with a Furuno 10-pin connector. It’s new. It’s for 600W transducers only, not 1 kW.

What you get

  • (1) Airmar MM-10FUR Mix and Match cable, 25 ft, Furuno 10-pin.
  • Condition: new.

Why use the Airmar MM-10FUR

With Airmar’s Mix and Match system, a transducer with the standard Mix and Match connector can be paired with a cable for any brand. The MM-10FUR connects a 600W Airmar transducer to a Furuno sounder with a 10-pin port. If you’re switching to Furuno, or replacing a damaged cable, you keep the transducer and change only the cable. See Airmar for compatibility.

See more transducer cables and wiring adapters.

Before you install

  • Check your transducer is a 600W Mix and Match model.
  • Confirm your Furuno uses the 10-pin port.
  • Route away from engine wiring.
  • Coil extra loosely.
  • Set transducer settings in the sounder.

Airmar MM-10FUR questions

Will it work with 1kW?

No, 600W only.

How long is it?

25 feet.

Buying older marine electronics with confidence

Older and discontinued parts keep a lot of boats running, but fit matters. Before you buy the Airmar MM-10FUR, compare part numbers, connectors and model names with what’s on your boat, and check the photos closely. We list what is included and what isn’t, and we note condition honestly. If you’re unsure whether it will work with your setup, send us your equipment list and we’ll help you check.

Why shop surplus and closeout parts

Surplus, closeout and new old stock parts let you repair or upgrade a boat for less than the cost of new equipment, and they keep useful gear out of the scrap pile. The Airmar MM-10FUR is one of many hard-to-find parts we’ve collected from dealers, distributors and refits. Stock is limited, and once it’s gone we may not be able to get another one, so it’s worth ordering a spare when you find the part you need.

How we source and check our stock

Much of what we sell comes from dealer closeouts, installer inventories and boats being refitted with new electronics. Every Airmar MM-10FUR listing is photographed as the actual item or a matching unit, and we describe the condition as plainly as we can, including scuffs, missing parts and whether it has been tested. If something in the photos or the description isn’t clear, ask us before you buy. We would rather answer a question than handle a return.

Shipping, returns and warranty

Shipping is free to the contiguous United States (lower 48). Hawaii, Alaska, Puerto Rico, other US territories and international orders have shipping calculated at checkout. Every order comes with 30-day returns and a 90-day warranty.

Questions about the Airmar MM-10FUR? Email sales@trollingmotorsdirect.org with your equipment details and we’ll help you check fit before you order.

Additional information

Location

1006304

error: Content is protected !!