Description
Two screens next to each other, both tipped back toward you, is what the 22 degree side by side bridge mount is built for. Its top plate is angled at 22 degrees, which gives you more adjustment on the monitors than a flat top would. It’s a heavy duty bridge machined from 6061 aircraft aluminum.
What the 22 degree top does
On a flat bridge, the screens start out level and all of the tilt toward you has to come from the gimbal. With the top plate already tipped 22 degrees, part of that angle is built in. The gimbal then has more range left to fine-tune for glare, for sitting versus standing, or for a second angler reading over your shoulder.
Two screens side by side is a common bow setup, and it’s what the 22 degree side by side bridge mount is built for: live sonar on one and a map or down imaging on the other, both in your line of sight at once.
Fit and compatibility
- Holds 2 screens side by side
- Top plate angled 22 degrees
- Tapped for all mounts except Helix 7
- 6061 aircraft aluminum
- Deck mounting hardware not included
- Under plate sold separately
The top is already drilled and tapped for every common gimbal pattern except the Helix 7. If you run a Humminbird HELIX 7, add the Helix 7 adapter bracket and it bolts on like the rest.
Sizing the 22 degree side by side bridge mount
We don’t print a dimension list for this one. Instead, the product photos include ruler shots, so scroll through them and hold a tape measure over your foot pedal and deck before you order.
Check three things: that the opening clears your trolling motor pedal, that two screens side by side won’t hang over the edge of the deck, and that the screens sit below anything you need to see over when running.
Installing it
Use deck hardware that suits your deck; it isn’t included. On an aluminum deck, add the Bridge Under Plate underneath to reduce flex. It’s sold separately and fits our bridges except the Bass Cat model. Through-bolt, seal the holes, and run cables before the screens go on so you aren’t fighting connectors at the end.
Questions
Will my Helix 7 bolt to the 22 degree side by side bridge mount?
Not directly. The Helix 7 needs the separate adapter bracket. Every other common unit bolts to the tapped holes.
Can it hold one screen?
It can, but the single 22 degree bridge is a neater fit if you only plan on one.
See more in our bridge mounts section, or email sales@trollingmotorsdirect.org with your screens and trolling motor pedal and we’ll help you check fit.












