Description
Our Single Folding Mount becomes a two-graph mount with the folding mount single to double plates. You take off the single gimbal plate and put this double gimbal plate setup in its place. It’s a simple change, and you keep the folding mount and base that are already on the boat.
What the folding mount single to double plates fit
These plates are made for our Single Folding Mount: the Folding Single Mount without Bridge and the Folding Single Monitor Mount with bridge or swivel base.
They take all graph brackets except the Humminbird Helix 7. For that unit, add the Helix 7 adapter bracket, sold separately.
Why go to two screens
A second graph on the same folding mount means you don’t have to split one screen between mapping and sonar. A common setup is a chart and down imaging on one unit, live sonar on the other. With the folding mount single to double plates, both screens still fold down together for the run and for the boat cover, so you don’t lose the reason you bought a folding mount in the first place.
Thread size
The gimbal plates are tapped for 1/4-20 threads. That’s a quarter-inch bolt with 20 threads per inch, from the coarse series of the Unified Thread Standard. If you’re replacing bolts on your graph brackets, buy 1/4-20 stainless and check the length so it doesn’t bottom out.
Making the change
- Fold the mount down or support it so it can’t move while you work.
- Take the graph off and set it somewhere safe.
- Remove the single gimbal plate.
- Fit the folding mount single to double plates in its place.
- Mount both graphs and set their angles.
On our folding double, the rule for bolting the two plates together is one plate with threads and one without. Keep that in mind when you assemble. Snug the bolts evenly so the plates sit flat against each other.
Things to check first
- Room: two graphs take more width than one. Check they clear the trolling motor, pedal and anything you step around.
- Cables: a second unit means another power and sonar run. Leave slack for the fold.
- Brackets: each graph needs its own gimbal bracket.
Questions
Do the folding mount single to double plates fit the telescoping mounts?
They’re made for the Single Folding Mount. For telescoping mounts we list a separate telescoping mount single to double plate.
Will a Helix 7 go on the gimbal plate?
Not without the Helix 7 adapter bracket.
Can I go back to a single later?
Yes. Keep your original single gimbal plate and swap it back on.
Other plates and adapters are in our mount plates section. For help, email sales@trollingmotorsdirect.org with your folding mount and both graph models.










