Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Live Sweep Wired Pedals

$127.00

Replacement wired foot pedals for Live Sweep with a 6 foot cord. Measure the run from your Live Sweep connection to where the pedals will sit before ordering.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

These are Live Sweep wired pedals, sold on their own as a replacement set with a 6 foot cord. If your originals got cracked under a boot, soaked one too many times or had the cord pinched in a hatch lid, this gets the sweep back under your feet.

When it’s time for replacement pedals

Pedals take more abuse than any other part of a Live Sweep. They sit on the deck where people stand, they get rained on, and the cord runs right where rods, nets and tackle boxes land. If the sweep only works when you wiggle the cord, or one direction quits, check the plug first, then look hard at the pedals and their cord.

A Live Sweep is sold with either wired or wireless pedals. This listing is the wired version only. For a cordless set, see our wireless pedals, and for everything else that goes with the system, browse our Live Sweep parts.

Planning around a 6 foot cord

Measure before you order a set of Live Sweep wired pedals. Run a tape from where the pedal cord connects to your Live Sweep to the spot you want the pedals, following the path the cord will actually take along the deck, not a straight line. If that path is longer than 6 feet, move the pedal spot rather than stretching the cord tight.

  • Keep the cord out of hatch lid seams and away from hinges.
  • Clip it along the deck edge so feet and rod butts don’t snag it.
  • Leave a little slack at the connection so a tug on the pedals doesn’t pull on the plug.

Wired or wireless

Wired pedals don’t need batteries, and on aluminum deck boats we recommend them. Wireless pedals clear the cord off the deck and can move around the boat with you. Some anglers run both: Live Sweep wired pedals at the bow and a wireless set to carry wherever they’re fishing.

If you’re new to aiming a live sonar picture, Garmin’s tips on running LiveScope are a good primer, and most of it carries over to other brands of live sonar.

Live Sweep wired pedals at a glance

ItemDetail
TypeWired foot pedals
UseReplacement pedals for Live Sweep
Cord length6 feet

Like the other electronics we sell, pedals are final sale, so check the cord length against your deck first. Our returns page has the details.

Questions

How long is the cord on the Live Sweep wired pedals?

The cord on these pedals is 6 feet long.

Will these replace the pedals my Live Sweep came with?

They’re sold as the replacement wired pedals for Live Sweep, so they’re meant to swap in for a wired set. If your unit shipped with wireless pedals and you want to add wired ones, email us first so we can confirm the connection on your model.

For help matching pedals to your unit, email sales@trollingmotorsdirect.org with your trolling motor and Live Sweep model and we’ll sort it out.

Related products

error: Content is protected !!