Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Bridge 22 Degree Single

$172.50

A single-screen bridge in 6061 aircraft aluminum with its top plate angled 22 degrees for more adjustment on the monitor. Tapped for all mounts except Helix 7. Deck hardware not included.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

The 22 degree single bridge mount lifts one screen over your trolling motor pedal on a top plate that’s already tipped toward you. That built-in 22 degree angle leaves more adjustment on the monitor once it’s in the gimbal. The bridge is machined from 6061 aircraft aluminum.

Why a single bridge with an angle

A lot of boats only need one screen up front, often a live sonar unit or a big combo graph. A bridge gets that screen up and over the pedal instead of beside it, and the angled top plate means the gimbal doesn’t have to do all the tilting. You end up with room left to adjust for glare or for standing versus sitting.

If you later decide you want two screens, the 22 degree double side by side bridge uses the same angle with room for a pair.

Specs and fit

ItemDetail
Screens1
Top plate angle22 degrees
Tapped forAll mounts except Helix 7
Material6061 aircraft aluminum
Deck mounting hardwareNot included

6061 aluminum is the alloy behind a lot of marine brackets, chosen because it’s strong for its weight and stands up to water. The top plate is drilled and tapped for the usual gimbal patterns. The one exception is the Humminbird Helix 7, which needs our Helix 7 adapter bracket.

Measuring before you order the 22 degree single bridge mount

The ruler photos in the gallery show its measurements. Compare them with your foot pedal, including the cable or cord coming off it, and with the space you have on the deck. A bridge that sits right on top of the pedal gets kicked every time you steer.

Think about sight lines too. The angled top plate tips the screen back toward you, so it reads well from behind the bridge, which is where you stand when running the trolling motor. On boats with a high bow deck, that tilt also helps when you’re sitting on the pedestal seat and glancing forward.

One more check: make sure the 22 degree single bridge mount won’t sit in the path of the trolling motor head when you stow it. Swing the motor up with the bridge set in place before you drill.

Installing

Supply deck hardware that suits your deck. On aluminum decks the Bridge Under Plate goes underneath and takes out a lot of flex. It fits our bridges except the Bass Cat model. Seal every hole and run your cables before the graph goes on.

Questions

Does the 22 degree single bridge mount come with a gimbal?

No. Use the gimbal bracket that came with your graph.

Will it fit my Helix 7?

With the separate Helix 7 adapter bracket, yes. Without it, the holes won’t line up.

More bridge options are in our bridge mounts section. Email sales@trollingmotorsdirect.org with your graph and pedal and we’ll help you check fit.

Related products

error: Content is protected !!