Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

MEGA 360 Ultrex Trolling Motor Bracket Only

$172.00

Low pro MEGA 360 mounting bracket with bolts for the Minn Kota Ultrex. Mounts the 360 on the port side, black powder coated. Bracket only: the clamp comes in our full Ultrex 360 kit.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

The MEGA 360 Ultrex trolling motor bracket is a low pro 360 mounting bracket for the Minn Kota Ultrex, sold on its own with bolts. It mounts the 360 on the port side of the motor and comes in a black powder coat finish.

Who orders the bracket by itself

Most people setting up a 360 for the first time are better off with the MEGA 360 Ultrex mounting hardware kit, which adds the LP360 dog bone clamp and stainless hardware. The bracket alone is for a narrower set of jobs:

  • You damaged a bracket and only want to replace that part.
  • You already own a clamp that suits the low pro bracket.
  • You run Ultrex motors on two boats and want a bracket waiting on each.

If you aren’t sure your clamp matches, email us a photo before ordering. It’s quicker than finding out at the ramp.

MEGA 360 Ultrex trolling motor bracket at a glance

SpecDetail
MotorMinn Kota Ultrex
StyleLow pro 360 mounting bracket
SidePort side of the motor
IncludedBracket and bolts
FinishBlack powder coat

The Ultrex Quest takes a different bracket. Quest owners should order the MEGA 360 Ultrex Quest bracket instead.

Check these before ordering

  • Your motor is an original Ultrex, not an Ultrex Quest. The model name is in your owner’s manual and on the motor’s label.
  • You have a clamp for it, or you’re ordering the full kit instead.
  • The left side of the motor is free. A Live Sweep or other transducer mount on that side may need to move; our Live Sweep mounts include starboard versions for the Ultrex.

Install notes

Before you tighten anything, hold the MEGA 360 Ultrex trolling motor bracket in position and check that the 360 will clear the motor’s stowed position and anything mounted on the deck nearby. Then snug the bolts, run the motor through deploy and stow a few times, and recheck.

For trailering, pair it with the MEGA 360 stabilizer bracket for Ultrex, which is made for an Ultrex running the 360 bracket and keeps the unit from shaking on the road.

To see what the 360 shows, read the 360 Imaging section of Minn Kota’s Humminbird Imaging page. All our 360 parts are under MEGA 360 mounts.

Questions we get

Does the MEGA 360 Ultrex trolling motor bracket include a clamp?

No. You get the bracket and bolts. The dog bone clamp comes in the full kit.

Is there a starboard version?

No, it’s listed for the left side of the motor. Email us if your bow layout needs something different.

Can I return it if it’s the wrong part?

Unused, yes, within 30 days. See our returns policy.

Email sales@trollingmotorsdirect.org with your Ultrex model and a bow photo if you want a second set of eyes on the fit.

Related products

error: Content is protected !!