Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

9000/9200 series Double Arm or Swivel Base Deck Mount with MEGA Mount Adaptor Plate and Under Plate

Price range: $968.00 through $1,005.00

Heavy duty frame and deck mount for Garmin 9017, 9019, 9022, 9024, 9027, 9217, 9219, 9222, 9224 and 9227 touchscreens. Double arm or riser swivel base, with MEGA adaptor plate and under plate.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

Garmin’s largest touchscreens, from the 17″ 9017 up to the 27″ 9227, need a frame sized to match, and this Garmin 9000 and 9200 deck mount is built for them. You choose your screen size and then a mount type, either a stationary double arm or a riser swivel base. Every one ships with a MEGA base adaptor plate and an under plate that clamp the deck between them.

Screens this frame fits

Size option9000 series9200 series
17″90179217
19″90199219
22″90229222
24″90249224
27″90279227

The frame is made to the size you pick, so a 22″ frame won’t hold a 24″ screen. If you’re still choosing a display, we stock the Garmin GPSMAP9224 and its siblings, and Garmin’s marine range shows the full lineup.

Mount types explained

The menu lists six mount types: 6″, 8″ and 10″ double arm, plus 6″, 8″ and 10″ riser swivel. Not every size and type pairing is offered, so the menu shows only valid combinations once you choose your screen.

Double arm stationary. Two arms, tightened once, and the screen stays where you put it. Good for a console or a dedicated bow screen.

Riser swivel. Loosen the knob and the monitor turns right or left, a full 360 degrees. With the knob loose you can lift the entire monitor away from the swivel base for travel, which is worth doing with a 24″ or 27″ panel bouncing down the highway.

The number in each mount type is the size. Bigger numbers stand the screen taller off the deck.

Garmin 9000 and 9200 deck mount holding a 24 inch Garmin touchscreen

Installing the Garmin 9000 and 9200 deck mount

The MEGA base adaptor plate sits on top and the under plate goes underneath. Through-bolt them and the deck is sandwiched, spreading the load of a big screen across a wide area. With a 27″ display on a tall riser, that support matters every time the bow slaps a wave.

Plan the spot with the screen in hand. Check sight lines from the seat and from standing, look for wiring or plumbing under the deck, and seal every hole. Parts are CNC machined aluminum in a black and clear anodize finish, machined and assembled in the USA.

Questions

Does the Garmin 9000 and 9200 deck mount work with the 9200 touchscreens too?

Yes. The 9217, 9219, 9222, 9224 and 9227 are all on the fit list, matched by size.

Can I leave the screen on the swivel base all season?

You can, but many owners lift it off for trailering. The swivel base is built so the monitor comes off with the knob loosened.

Browse our other single monitor mounts, or email sales@trollingmotorsdirect.org with your Garmin model and boat for help choosing the right Garmin 9000 and 9200 deck mount size and type.

Additional information

9000/9200 Monitor Size

17", 19", 22", 24", 27"

Mount Type

6" Double Arm Mount, 8" Double Arm Mount, 6" Riser Swivel Mount, 8" Riser Swivel Mount, 10" Double Mount, 10" Riser Swivel Mount

Related products

error: Content is protected !!