Description
Our Live Sweep Ultrex Quest mount starboard side holds a Live Sweep on the right side of a Minn Kota Ultrex Quest. It’s made in the USA from CNC machined aluminum with a black powder coat, and it installs with stainless steel hardware and a set of standard Allen wrenches.
Why starboard on a Quest
Our MEGA 360 hardware for the Ultrex Quest mounts on the port side. If you run a 360 on that motor, or think you might, the Live Sweep Ultrex Quest mount starboard side is the bracket to use so the two aren’t fighting over the same space.
Without a 360 in the picture, it comes down to your boat. Pick the side where the transducer cable has the cleanest path to the graph and where the Live Sweep won’t crowd anything on the deck when the motor is stowed. Stand at the bow with the motor stowed and look at both sides; that two-minute check answers most of the question.
Bracket only
This is the starboard bracket by itself. A new Live Sweep includes its mount when you choose Ultrex Quest starboard at checkout, so buy this one to replace a damaged bracket, move a Live Sweep over from another motor, or rig a second boat. If you need the dog bone as well, the Ultrex Quest starboard kit includes both.
Live Sweep Ultrex Quest mount starboard side build
| Item | Detail |
|---|---|
| Fits | Minn Kota Ultrex Quest, starboard side |
| Material | CNC machined aluminum |
| Finish | Black powder coat |
| Hardware | Stainless steel |
| Tools | Standard Allen wrenches |
| Made in | USA |
Install notes
Use a good set of Allen wrenches rather than the worn one from the junk drawer. A rounded-out stainless bolt head is a real pain to remove once it’s seated in aluminum. Snug the Live Sweep Ultrex Quest mount starboard side with the motor deployed, run it through stow, deploy and full steering in both directions, and only then do the final tightening. Stainless hardware is included, so the wrenches are the only thing you supply.
Minn Kota’s Ultrex page shows the Quest models if you need to confirm yours. If you’re running a Cable Steer instead of a Live Sweep, email us before ordering and we’ll confirm the right bracket. Other mounts are in our Live Sweep section.
Questions
Will this starboard bracket fit an older Ultrex?
No. The original Ultrex has its own Ultrex starboard mount.
What tools do I need?
Standard Allen wrenches. The stainless hardware comes with the mount.
Can I send it back if my plans change?
Unused non-electronic parts can be returned within 30 days per our returns policy.
Send your Ultrex Quest shaft length and graph model to sales@trollingmotorsdirect.org and we’ll make sure the Live Sweep Ultrex Quest mount starboard side is the right bracket before you buy.









