Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Live Sweep Power Pole ZR Mounting Hardware

$297.00

The machined mount and dog bone needed to carry a Live Sweep on a Power-Pole MOVE ZR trolling motor. CNC aluminum with black powder coat and stainless steel mounting hardware. Made in the USA.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

To put a Live Sweep on a Power-Pole MOVE ZR you need two machined parts, a ZR mount and a dog bone, and the Live Sweep Power Pole ZR mounting hardware is both in one order. Both are CNC machined aluminum in black powder coat with stainless steel mounting hardware, made and assembled in the USA.

What you get

PartJob
ZR mountBracket that attaches to the MOVE ZR
Dog boneLinks the Live Sweep to that bracket
Stainless hardwareBolts to put it together

The Live Sweep arm, pedal and fob are sold separately. If your dog bone is still good, the bracket alone is the Live Sweep Power Pole ZR mount.

When to order the Live Sweep Power Pole ZR mounting hardware

If you’re buying a new Live Sweep, choose the Power Pole ZR option on the Live Sweep with mounting hardware and these parts come with it. Order this kit on its own when:

  • you bought the Livesweep Only option and have since fitted a ZR,
  • you’re moving your Live Sweep from another motor to a ZR,
  • or you want a second ZR boat ready to take the arm.

Port or starboard

The ZR mount is designed for either side. Decide by where your graph sits and how the cables will run. Pick the side with the cleaner cable path and the least clutter where you stand.

Power-Pole’s website lists the MOVE ZR’s own specs and manuals if you need to confirm your motor or shaft length.

Putting it together

  1. Lay out the mount, the dog bone and the bolts, and dry fit by hand.
  2. Set the side and height, then tighten the bolts evenly.
  3. Route the Live Sweep and transducer cables with slack for stowing and deploying.
  4. Cycle the motor and the arm at the dock before you fish.

If your Live Sweep came off a motor with a different shaft length, check whether its extension tube needs to change before you finish. Once the Live Sweep Power Pole ZR mounting hardware is tight, recheck it after the first day on the water; new parts can settle a little as they bed in.

Common questions

Does the Live Sweep Power Pole ZR mounting hardware fit the PV?

No. The MOVE PV has its own complete unit, the Live Sweep for Power Pole PV.

Is the Live Sweep arm included?

No. This is the mount, dog bone and stainless hardware only.

Can I move it from port to starboard later?

The ZR mount is designed for either side, so moving it means unbolting and refitting rather than buying new parts.

Every other part is under Live Sweep mounts and parts. Email sales@trollingmotorsdirect.org with your ZR model and what you have now, and we’ll confirm the order.

Related products

error: Content is protected !!