Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Power Pole ZR Bounce Eliminator Kit – Scratch and Dent

$75.00

Scratch and dent Power-Pole ZR bounce eliminator kit. Same aluminum kit with stainless hardware, but the finish may have scratches, machining marks, color defects or nicks. Sold as is, final sale.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns
SKU: 701-SD
Category: ,

Description

This ZR bounce eliminator scratch and dent kit is the same Power-Pole ZR bounce eliminator as our standard kit, with flaws in the finish. It may have scratches, machining marks, color defects or nicks. It’s sold as is and it’s final sale, with no returns or refunds.

What scratch and dent means here

The listed flaws are all in the finish. Underneath, it’s the kit that stops a Power-Pole ZR trolling motor bouncing when it’s stowed on the deck. Expect one or more of these:

  • Scratches in the finish
  • Machining marks in the finish
  • Color defects in the anodize
  • Nicks in the finish

Because it’s sold as is, look at the photos and decide whether marks matter to you on a part that sits on the bow and gets stepped around all day. If they don’t, the ZR bounce eliminator scratch and dent kit does the same job for less.

ZR bounce eliminator scratch and dent kit pieces with stainless steel hardware

Check before you order

  • Motor: it’s for the Power-Pole ZR. Power-Pole also makes the MOVE PV, which this kit isn’t listed for.
  • Finish: if a perfect finish matters, buy the standard kit instead.
  • Returns: there aren’t any on scratch and dent, so ask us any fit questions first.

A ZR bounce eliminator scratch and dent kit makes most sense on a boat that already works hard. On a bow with a few seasons of scuffs, a mark on the kit won’t stand out.

Same kit, same specs

  • Fits: Power-Pole ZR trolling motor
  • Material: aluminum with a black anodize finish
  • Hardware: stainless steel, mounting hardware included
  • Made in: USA

Power-Pole’s ZR page lists the motor with a scissor mount and 45, 52 and 60 inch shafts. A long motor resting stowed on its mount bounces in rough water and on the trailer, which is what this kit is for.

Fitting tip

If a bolt won’t go in, check for powder coat in the Power-Pole holes before you reach for a bigger wrench. Chase the holes with a 5/16 in.-18 tap, blow out the chips, and the bolts should start by hand. Forcing stainless through paint can gall the threads.

Scratch and dent questions

Can I return the ZR bounce eliminator scratch and dent kit?

No. Scratch and dent parts are sold as is and final sale under our returns policy.

Does it work the same as the standard kit?

The flaws are listed as cosmetic, in the finish. It’s the same kit underneath, with the same fit and hardware.

What if I want a clean finish?

Order the standard Power Pole ZR bounce eliminator kit. Unused, it can be returned within 30 days. Other discounted parts are in scratch and dent.

Email sales@trollingmotorsdirect.org with your ZR’s shaft length if you want us to confirm fit before you buy.

Related products

error: Content is protected !!