Description
For a big helm screen that runs charts, networked sonar and the rest of the boat, the Garmin GPSMAP 1643 chartplotter is a 16-inch x3-series touchscreen with Garmin Navionics+ charts for the U.S. and Canada. Garmin part 010-02919-01 is the plotter-only version, listed by Garmin as non-sonar with mapping. If you want sonar built in, the 1643xsv is the same screen with a sounder inside.
Plotter-only: how sonar gets on the screen
The 16×3 series supports LiveScope, Panoptix, ClearVü, SideVü and Garmin CHIRP traditional sonar, but on this model there’s no built-in sounder. Live sonar and sonar modules connect over the Garmin Marine Network instead. That suits boats with more than one screen, where a single sonar source feeds every display.
For a one-screen fishing setup, the GPSMAP 1643xsv is usually less wiring.
What the Garmin GPSMAP 1643 chartplotter does well
- Screen: high-resolution 16-inch IPS touchscreen, readable in sunlight, from wide angles and through polarized glasses.
- Speed: the fast x3-series processor, with slim borders and edge-to-edge glass that fit a range of helm layouts.
- Charts: preloaded Garmin Navionics+ with Auto Guidance+ (for planning only, Garmin says), plus support for Navionics Vision+ relief shading.
- Trolling motor: Force trolling motor support and integration, so you can control the motor from the helm.
- Engines: built-in J1939 and engine data such as RPM and fuel flow from compatible manufacturers.
- Digital switching: EmpirBus and other OneHelm-compatible products.
Building out the network
NMEA 2000, NMEA 0183 and the Garmin Marine Network connect sonar, autopilot, radar and cameras. Wi-Fi pairs the unit with the ActiveCaptain app for OneChart, smart notifications and software updates. ANT links a quatix watch, gWind Wireless 2, GNX Wind instrument or wireless remote. Sailors also get SailAssist with sailing polars, laylines and race start line guidance.
If you fish from a Garmin Force trolling motor, our Garmin trolling motor guide explains how the motor and a GPSMAP work together.
Box list
- GPSMAP 1643 display
- Power cable
- NMEA 2000 T-connector and drop cable
- Flush mount kit with gasket
- Protective cover and trim piece snap covers
- Documentation
No bail mount is listed in the box, so plan on a flush install or ask us about other options.
Before you order the Garmin GPSMAP 1643 chartplotter
- Dash space: get the cutout size from Garmin’s installation instructions and check it against your panel, including depth behind the dash, before anything gets cut.
- Sonar plan: decide where sonar comes from: a networked module, a live sonar system, or the 1643xsv instead.
- NMEA 2000: the box has a T-connector and drop cable, which assumes the boat already has a powered, terminated backbone. A boat without one needs a backbone kit too.
Common questions
Can I connect a transducer directly?
No. The Garmin GPSMAP 1643 chartplotter is the non-sonar version. Choose the 1643xsv for built-in sonar, or add networked sonar.
Where can I check Garmin’s details?
On Garmin’s 010-02919-01 product page.
Browse other screens in Garmin graphs. Electronics are final sale here (see returns), so email sales@trollingmotorsdirect.org, Monday to Friday from 9am to 6pm, with your helm layout and the gear you’re tying in.









