Description
Built for bass boats, the Garmin Force Pro trolling motor pairs a scissor-style bow mount and a 50 or 57 inch shaft with a GT56UHD scanning sonar transducer in the nose. It’s rated at 100 lb of thrust on 36 V and 80 lb on 24 V. The box includes a foot pedal, a remote with gesture control, a stabilizer and two props.
Garmin Force Pro trolling motor specs
| Spec | Garmin figure |
|---|---|
| Thrust | 100 lb at 36 V, 80 lb at 24 V (ISO 13342, high-efficiency prop) |
| Shaft | 50 or 57 inch |
| Mount | Scissor-style, pull cable and dual gas springs |
| Positioning | Dual-frequency GPS and built-in heading sensor |
| Sonar | GT56UHD: CHIRP 150 to 240 kHz at 350 W; ClearVü and SideVü 455, 800 and 1000 kHz at 500 W; 12-pin orange connector |
| Sonar depth | CHIRP 800 ft freshwater, ClearVü 400 ft, SideVü 500 ft |
| Speed control | 20 steps |
| Water | Fresh, brackish and salt; IPX7 |
| Warranty | Garmin 3-year, limited lifetime on the shaft |
On the water
Anchor lock uses the multiband GPS to hold position, and Garmin added reverse prop spin and calm-water cable unwrap to cut down on motor activity while it holds. You also get anchor lock jog, heading hold, cruise control and route following: draw a route on a compatible Garmin chartplotter and the motor drives it while you fish. Our spot lock guide explains how GPS anchoring works.
Auto forward points the motor ahead as it deploys, and a lighted indicator on the shaft cap shows which way it’s facing in low light. If weeds build up, manual reverse prop spin blows them off. The Garmin Force Pro trolling motor is also extremely quiet above and below the water, by Garmin’s account, which matters when fish are shallow.
Remote and pedal
The included remote has a 1.2 inch sunlight-visible color display, programmable chartplotter keys and gesture control, and it floats. The wireless pedal measures 12 x 9 x 4 1/2 inches, has adjustable resistance, and runs on two AA batteries or wired 12, 24 or 36 V power. Garmin rates the remote at about 43 weeks with the backlight low and the pedal at a full season on AAs, and Quatix watch control is supported.
In the box and rigging
- Force Pro trolling motor
- High-efficiency and weedless props
- Foot pedal and remote
- Stabilizer
- Assembly and mounting hardware, documentation
Garmin calls for a 24 or 36 V battery bank that can deliver 60 A continuously, plus a 60 A circuit breaker, which isn’t in the box. The power cable is about 4 ft on the 50 inch and 3.5 ft on the 57 inch. Setup, calibration and every control are covered in Garmin’s Force Pro owner’s manual.
Force Pro questions
Should I get the 50 or 57 inch Garmin Force Pro trolling motor?
Both are aimed at bass boats. Taller bows and rough water favor the 57; email us your boat model if you’re unsure. If you plan to add a Garmin Spy Pole, Garmin recommends the 49 inch pole for 57 inch Force Pro motors.
Is the Force Pro final sale?
Yes. Motors count as electronics, and electronics are final sale under our returns policy. Ground shipping is free on orders of $199 or more to the lower 48 and DC.
Send your boat, bow height and battery plan to sales@trollingmotorsdirect.org and we’ll help you pick between the 50 and the 57. The full Garmin lineup is in our Garmin trolling motors category.















