Description
To carry a GT series transducer in the nose of a compatible trolling motor, you need the Garmin GT transducer nose cone, model 010-12832-21, a large black cone. Use it to replace a damaged standard part, or to add a GT transducer to a motor that doesn’t have one. Garmin lists it in the large size, compatible with the GT54 and GT56.
Transducers it takes
Garmin names these GT models as compatible with this cone:
- GT22
- GT24
- GT52
- GT54
- GT56
The cone suits compatible Garmin trolling motors. If you aren’t sure your motor takes this nose, send us the model before ordering and we’ll check.
Read the exact transducer model off its label or cable before you order the Garmin GT transducer nose cone, and tell us if it’s a transom (TM) version. Garmin sells several GT models in more than one mounting style, and the letters after the number matter.
Running a new transducer through the shaft
If you’re routing a new transducer cable up the trolling motor shaft, Garmin recommends its transducer replacement kit for the job. We list Garmin’s replacement parts for the Force and the Kraken.
Garmin’s Force Pro field service manual shows the transducer fixed to the nose cone parts with 3 mm hex screws and bushings, and the cone itself held on with 4 mm hex screws at the front. The skeg comes off first when you replace the cone. Metric hex keys and some patience with the cable are all you need.
Fitting the Garmin GT transducer nose cone
Disconnect power and unplug the transducer at the graph before you start. Look over the old cable for nicks or crushed spots while it’s out, and don’t kink the new one where it leaves the nose. With the transducer replacement kit, follow Garmin’s routing steps through the shaft rather than forcing the cable.
When everything is back together, power up at the dock and check the sonar picture before the first trip. A cable pinched during assembly usually shows up right away as a blank or noisy screen.
Common questions
Does the Garmin GT transducer nose cone include a transducer?
No. It’s the nose cone only.
Can I fit it without a transducer?
Yes. Garmin lists it as a replacement for the standard part on compatible motors. If you don’t need the housing, the smaller black round nose cone is the plain option.
Can I send it back?
See our returns policy and confirm fit with us before ordering.
Email sales@trollingmotorsdirect.org with your motor model and the transducer you plan to run, and we’ll confirm the parts list. The rest of our Garmin parts are in the Garmin trolling motor accessories category.










