Description
The Lowrance Active Imaging HD 2-in-1 transducer is for boats that already have the traditional sonar transducer they want. It covers SideScan and DownScan with ActiveImaging HD, and leaves CHIRP to whatever transducer you choose. Lowrance part 000-16063-001, on a 25 ft (7.6 m) cable with a 9-pin connector.
What it does and doesn’t include
There are two jobs in this housing, SideScan and DownScan, both in high definition. There’s no traditional sonar element. That’s the point of the 2-in-1: you’re free to pick a separate transducer for traditional sonar, whether that’s a thru-hull for deep water, an in-hull puck, or a CHIRP band that suits your fishing.
ActiveImaging HD is Lowrance’s highest-definition imaging line, running up to 1.2 MHz on the HD 3-in-1. Lowrance launched the line with its next-generation Ultimate Fishing System, alongside HDS PRO.
Check your display for the Lowrance Active Imaging HD 2-in-1 transducer
For the ActiveImaging HD line, Lowrance lists HDS PRO as a direct fit and HDS LIVE, HDS Carbon and Elite FS through an S3100 sonar module. The listing for this 2-in-1 doesn’t spell out its own compatibility, so send us your display model and we’ll confirm before you order.
You’ll also need a way to connect two transducers: a second sonar input, a module, or a Y-cable setup. Plan that first, because it decides where the cables run.
Installing two transducers
- Mount the Lowrance Active Imaging HD 2-in-1 transducer in clean water on the transom, clear of strakes, rivets and prop wash.
- Keep it apart from your traditional sonar transducer so each has its own clean flow.
- Set the face at or just below the hull bottom and seal every hole.
- Route the 25 ft cable away from engine wiring and leave a service loop at the transom.
The product photos include a dimension drawing, which helps when you’re checking whether both transducers fit side by side on a crowded transom.
When the 2-in-1 is the better buy
If you fish deep water and rely on a high-power thru-hull, or your current transducer already reads bottom well at speed, the 2-in-1 adds HD imaging without touching that setup. If you’re starting from scratch with one mounting spot, the Active Imaging HD 3-in-1 is simpler. Both are in our Lowrance transducers section, and our Lowrance fish finder guide covers the displays.
Questions
Does it show traditional sonar on its own?
No. The Lowrance Active Imaging HD 2-in-1 transducer is imaging only. Pair it with a separate transducer for the 2D sonar view.
Can I return it if my display doesn’t support it?
Electronics are final sale at our shop, so please check with us first. Our returns policy has the details.
Email sales@trollingmotorsdirect.org with your display, current transducer and boat, and we’ll help you plan the setup.











