Description
The wire puck extender adds 1/2 inch of height to a Wire Puck that’s already on your boat, giving it room for more electronics wires without cutting a new hole. If you’ve added a second graph or a live sonar unit since rigging the boat, this is the easy way to make space. It matches the puck’s diameters and is made from the same high density polyethylene.
What the wire puck extender does
The original puck is 1 inch tall. Stack this on top and you get 1/2 inch more room for the cable bundle, with the same 2.860 inch outside diameter and 1.970 inch inside diameter. The result is about the same outlet height as our Wire Puck XL, without pulling out the puck you installed.
What’s included and what isn’t
Read this part before you order, because the photo shows a finished stack, not what’s in the box.
| Included | Not included |
|---|---|
| Wire puck extender ring | The Wire Puck |
| 2 stainless bolts | The grommet |
| 2 long stainless bolts and lock nuts |
The listing includes 2 stainless steel bolts, but it also lists 2 long stainless bolts and lock nuts as not included. If you’re not sure which bolts your stack needs, email us before ordering and we’ll sort it out with you.
Specs
- Adds 1/2 inch of height
- Outside diameter: 2.860 inches
- Inside diameter: 1.970 inches
- Material: high density polyethylene
Stacking it on your puck
Before you start, note how the cables run through the puck so they go back the same way. Remove the fasteners holding your existing puck, set the extender on top, and refasten through both pieces with bolts long enough to pass through the full stack. Stainless bolts are the right choice on a boat. Check that the cables aren’t pinched between the two parts before you tighten everything down.
A wire puck extender makes the most sense when the original puck is already sealed in and working, and you just need more height. If you’re starting from scratch with lots of cables, the Wire Puck XL may be simpler. If you don’t have a puck yet, start with the Wire Puck.
Questions
Does the wire puck extender include the Wire Puck?
No. It’s the extender only. You add it to a Wire Puck you already have.
Does it fit the Wire Puck XL?
The listing says it’s for the existing Wire Puck. Email us if you want to stack it on an XL.
Can I return it if I don’t need it?
Yes, within 30 days, as long as it’s unused. Details are in our returns policy.
See all our wire puck parts, or email sales@trollingmotorsdirect.org with a photo of your current puck and we’ll confirm what you need.













