Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

DBL Seat Base

$825.00

A low profile double seat base CNC machined from aircraft grade aluminum with no welds, gray powder paint and stainless hardware. Choose a 3/4 inch, 3/4 inch threaded or 1.77 inch pin. Seats not included.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

The DBL seat base carries two seats on one low, machined aluminum base, and it slides on the deck so you can still get into the compartments under it. It’s CNC machined from aircraft grade aluminum with no welds, finished in gray powder paint and put together with stainless hardware. Seats aren’t included, so you can use the pair you already like.

Low profile, no welds

On a casting deck, anything sticking up is something to trip over while you’re fighting a fish. The base is kept low to cut down on that.

Welds are a common place for seat bases to crack after years of pounding across rough water. This one is machined without welded joints, so there’s no weld to break.

It also slides easily on the deck. That means you can move the double seat aside to open a compartment lid instead of unbolting anything.

A DBL seat base makes the most sense on boats where two people fish side by side from the back deck, or where one angler wants a second seat close by for a partner or a kid. One base, two seats, and fewer holes in the deck than two separate pedestals.

What the DBL seat base is made of

ItemDetail
TypeDouble seat base
MaterialCNC machined aircraft grade aluminum
ConstructionNo welds
FinishGray powder paint
HardwareStainless steel
SeatsNot included
MadeUSA

Choosing the seat pin

The Seat Pin dropdown matches the base to the seat socket in your boat. All three are the same price:

  • 3/4 inch pin: for a plain 3/4 inch socket.
  • 3/4 inch threaded pin: for a threaded 3/4 inch socket.
  • 1.77 inch pin: the Ranger size.

Pull your current seat and look into the socket before you order the DBL seat base. Threads are easy to spot, and a tape measure tells a 3/4 inch hole from a 1.77 inch one at a glance.

If you change boats later, the pins are sold on their own: the 3/4 inch pin, the 3/4 inch threaded pin and the Ranger 1.77 pin.

Looking after it

Rinse sand and grit out from under the base when you wash the boat, since grit is what wears deck carpet where a sliding base sits. Check the stainless hardware for snugness at the start of each season.

Common questions

Does the DBL seat base come with seats?

No. It’s the base only. You add your own seats.

Can I switch pins later?

Yes. Each DBL seat pin is sold separately, so you can buy a different one if you move the base to another boat.

Which seats will bolt to it?

The listing doesn’t name seat brands. Email us your seat model and we’ll check it against the base before you order.

See more seat accessories, or email sales@trollingmotorsdirect.org with your boat make, the seat socket size and the seats you plan to use.

Additional information

Seat Pin

3/4" Pin, 3/4" Threaded Pin, 1.77" Pin

Related products

error: Content is protected !!