Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

DBL SEAT PIN – 3/4 Threaded

$16.00

A 3/4 inch threaded seat pin with stainless steel hardware for our DBL Seat Base. Use it when your boat’s seat socket is threaded, or keep it as a spare when you move the base between boats.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns
SKU: 35-075-T-PIN
Category: , ,

Description

The threaded DBL seat pin is the threaded 3/4 inch pin that connects our DBL Seat Base to a threaded seat socket in the deck. It comes with stainless steel hardware. You’d buy it on its own if you’re moving the base to a boat with a threaded socket, or you need a spare.

What it fits

This pin is listed for the DBL Seat Base. It isn’t sold as a universal seat post, and we don’t list it for other brands of seat base.

When you order the DBL Seat Base, you already pick a pin. This separate listing for the threaded DBL seat pin is for when your setup changes after that, or when you want a second pin on hand. It’s also handy if you run the same base in two boats and don’t want to swap pins every time.

Threaded or plain: how to tell

Seat sockets in boat decks come in two broad styles. Some are a smooth tube the pin drops into. Others have threads inside, and the pin screws in.

To check yours, pull the seat and look down the socket with a flashlight. If you see threads, you want the threaded seat pin. If the walls are smooth, order the plain 3/4 inch pin instead. Measure the hole too: a 1.77 inch Ranger socket needs the Ranger pin.

The three DBL seat pins

PinSocketListed build
Threaded DBL seat pinThreaded 3/4 inchStainless steel hardware
DBL Seat Pin 3/4 inchPlain 3/4 inch6061 aircraft grade aluminum, stainless hardware
DBL Seat Pin Ranger 1.77Ranger 1.77 inch6061 aircraft grade aluminum, stainless hardware

Installing the threaded DBL seat pin

Thread it in by hand first so it doesn’t cross thread. If it binds early, back it out and start again rather than forcing it. A cross threaded socket is far harder to fix than a pin.

Stainless steel hardware resists rust in a wet deck socket, but rinse out sand and grit when you have the seat off so the threads stay clean.

Questions

Will the threaded DBL seat pin fit another seat base?

It’s listed for our DBL Seat Base only. We can’t confirm fit on other bases.

Is it the same as the plain 3/4 inch pin?

No. This one is threaded. The plain pin is for smooth sockets.

Can I return it if my socket turns out to be plain?

As long as it’s unused, yes. Non-electronic parts have a 30 day window under our returns policy.

Find more seat accessories, or email sales@trollingmotorsdirect.org with your boat make and a photo of the seat socket so we can tell you which pin you need.

Related products

error: Content is protected !!