Description
A full circle of sonar around the boat, in 2D and 3D, is what the Garmin GT360UHD transducer, model 010-03012-10, draws on your chartplotter from a bird’s-eye view. It mounts on a Garmin Spy Pole, sold separately, and pairs with a compatible Garmin chartplotter. Once an area is scanned, you can fish it without having to rescan over and over.
What you see on the screen
Garmin calls the view OneVü sonar. True Motion ties the scan to GPS, so the picture stays true to location as the boat moves. Garmin says the transducer keeps a rolling buffer of imagery covering roughly a football field.
Put a LiveScope transducer on the same pole and you can overlay the live sonar on the 360 picture in 3D. That pairing is what Spy Pole was designed around. Our Garmin LiveScope guide covers the live side of that setup.
Garmin GT360UHD transducer specs
| Spec | Garmin figure |
|---|---|
| Frequencies | 455, 800 and 1070 kHz |
| Transmit power | 500 W |
| Beamwidth | 0.52 x 52 (high band), 0.64 x 35 at 800 kHz, 1.1 x 52 at 455 kHz |
| Range | 500 ft |
| Cable length | 20.3 ft (6.2 m) |
| Sensors | Depth and temperature |
| Connector | 12-pin |
| Size with mount | 8.5 x 2.3 x 3.8 in (216 x 58 x 97 mm) |
In the box
- GT360UHD 12-pin transducer
- GT360UHD transducer mount for Spy Pole
- LiveScope adjustable perspective shaft mount
- Dogbone stabilizer
- Mounting hardware and documentation
Because the dogbone comes in this box, you don’t need to buy one separately for a two-transducer pole. Garmin requires it whenever two transducers are on Spy Pole. Plan your cable route with the 20.3 ft lead in mind, since the cable has to travel up the pole and back to the graph.
Planning the rest of the rig
Garmin’s Spy Pole spec sheet lists the LVS32, LVS34 and LVS62 as supported LiveScope transducers. If you want the 3D overlay with a newer LiveScope model, email us and we’ll confirm. The Garmin GT360UHD transducer rides low on the pole, so set shaft depth with the boat loaded the way you fish, and make sure it stays in the water when the bow rocks. Spy Pole’s adjustable depth makes that easy to fine-tune after the first trip.
Questions
Do I need a Spy Pole to run the Garmin GT360UHD transducer?
Yes. Garmin builds it to mount on Spy Pole, and the Garmin Spy Pole is sold separately. Garmin’s GT360UHD page has the current chartplotter compatibility list.
Is the GT360UHD returnable?
No. Electronics are final sale here, so confirm your chartplotter works with it first. Full terms are in our returns policy, and orders over $199 ship free by ground to the lower 48 and DC.
Before you order, send your chartplotter and trolling motor models to sales@trollingmotorsdirect.org and we’ll confirm the setup. The rest of the Spy Pole lineup is in our Spy Pole category and our Garmin transducers.












