Description
Take our bridge extender, give it legs that turn, and you have the bridge extender rotator. The rotating legs give you 180 degrees of adjustment, so the bridge can be set to suit your deck instead of the deck having to suit the bridge. It takes double, single, folding and telescoping mounts, and it’s made in the USA from heavy duty 6061 aircraft aluminum.
What rotating legs get you
A fixed bridge has one footprint. If that footprint lands on a hatch seam, a rivet line or the edge of a pedal tray, you’re stuck. With the bridge extender rotator, the legs swing through 180 degrees, which lets you turn the feet to a spot that works. If you ever move the bridge to a different boat, the bridge extender rotator can be reset to the new deck instead of replaced.
It also helps when the deck isn’t square to where you stand. You can angle the legs to the deck while keeping the top, and your screens, facing you.
Foot pedal span options
- 11″ for tight pedal areas
- 13″, our standard bridge extender span
- 15″, which fits the SeaArk Flex
- 16″ for wider pedals
- 19″ for the widest setups
Measure the pedal at its widest, including the cord exit, and pick the span that leaves room for your foot to work it.
Mounts, deck and tools
Double, single, folding and telescoping mounts all bolt to the top. Assembly and adjustment take standard Allen wrenches, so keep a set in the boat for tweaks after the first few trips.
Deck mounting hardware isn’t included. On an aluminum deck, two add-ons help with flex: the Bridge Multi Mount Plates, which stiffen the deck and give the bridge more than one position to mount in, and the Bridge Under Plate, which goes under the deck. Both are sold separately.
Setting it up
Loosely assemble the bridge, place it over the pedal and rotate the legs until both feet land on solid, flat deck. Snug everything, step through the pedal’s full travel, then mark and drill. Tighten the leg hardware fully once the bridge is bolted down so the angle can’t drift.
Mark the leg angle with a paint pen once it’s set. If you ever pull the bridge extender rotator off for a deck repair or a new pedal, it goes back exactly where it was.
Questions
Does the bridge extender rotator come in different leg heights?
It’s offered by foot pedal span only. If you need a specific height, email us and we’ll tell you what we can do.
How is it different from the plain bridge mount extender?
The legs rotate. The plain bridge mount extender has fixed legs and more span and leg height options.
See more in our bridge mounts section, or email sales@trollingmotorsdirect.org with your deck layout and pedal width for help.












