Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Airmar P617V-DST800 20-478-01 Marine Thru-Hull Transducer Installation Kit

$89.99

The Airmar 20-478-01, also listed as 20-364-01 and 20-573-03, is the through-hull installation kit for the P617V housing used with the DST800, DT800 and D800 transducers. It’s new old stock. What you get (1) Airmar 20-478-01 install kit, as shown. Condition: new old stock. Why use the Airmar 20-478-01 The DST800 and its siblings are among the most popular smart transducers, giving depth, speed and temperature from one through-hull. When fitting a new one, or redoing a leaking installation, the matching Airmar kit ensures the housing seals properly and the insert locks in. Using the right kit avoids leaks and…

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

The Airmar 20-478-01, also listed as 20-364-01 and 20-573-03, is the through-hull installation kit for the P617V housing used with the DST800, DT800 and D800 transducers. It’s new old stock.

What you get

  • (1) Airmar 20-478-01 install kit, as shown.
  • Condition: new old stock.

Why use the Airmar 20-478-01

The DST800 and its siblings are among the most popular smart transducers, giving depth, speed and temperature from one through-hull. When fitting a new one, or redoing a leaking installation, the matching Airmar kit ensures the housing seals properly and the insert locks in. Using the right kit avoids leaks and keeps readings accurate. See Airmar for instructions.

See more transducer mounts and fairing blocks, including the P617V housing.

Before you install

  • Confirm your sensor is a DST800, DT800 or D800.
  • Check the kit parts against the photos.
  • Use below-waterline sealant.
  • Tighten the hull nut firmly.
  • Check for leaks after launching.

Airmar 20-478-01 questions

Does it include the sensor?

No, just the kit.

Is it new?

Yes, new old stock.

Buying older marine electronics with confidence

Older and discontinued parts keep a lot of boats running, but fit matters. Before you buy the Airmar 20-478-01, compare part numbers, connectors and model names with what’s on your boat, and check the photos closely. We list what is included and what isn’t, and we note condition honestly. If you’re unsure whether it will work with your setup, send us your equipment list and we’ll help you check.

Why shop surplus and closeout parts

Surplus, closeout and new old stock parts let you repair or upgrade a boat for less than the cost of new equipment, and they keep useful gear out of the scrap pile. The Airmar 20-478-01 is one of many hard-to-find parts we’ve collected from dealers, distributors and refits. Stock is limited, and once it’s gone we may not be able to get another one, so it’s worth ordering a spare when you find the part you need.

How we source and check our stock

Much of what we sell comes from dealer closeouts, installer inventories and boats being refitted with new electronics. Every Airmar 20-478-01 listing is photographed as the actual item or a matching unit, and we describe the condition as plainly as we can, including scuffs, missing parts and whether it has been tested. If something in the photos or the description isn’t clear, ask us before you buy. We would rather answer a question than handle a return.

Shipping, returns and warranty

Shipping is free to the contiguous United States (lower 48). Hawaii, Alaska, Puerto Rico, other US territories and international orders have shipping calculated at checkout. Every order comes with 30-day returns and a 90-day warranty.

Questions about the Airmar 20-478-01? Email sales@trollingmotorsdirect.org with your equipment details and we’ll help you check fit before you order.

Additional information

Location

1032133

error: Content is protected !!