Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

C-Map *NEW* 6-Pin Power Data Cable for Legacy Older Display Chartplotter GPS

$21.99

This 6-pin power data cable is a power and data lead for older, legacy chartplotters and GPS displays. It’s listed as a C-Map cable and is a 6-pin Sitex power cable for legacy units. It’s new old stock. Because many older units used similar-looking plugs, please compare the connector in the photos with the socket on your unit before you order. What you get (1) 6-pin power data cable for legacy display units. Condition: new old stock. Nothing else is included. Who needs a 6-pin power data cable Older chartplotters and GPS units often still work perfectly, but their power…

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns
SKU: 326304
Category: ,

Description

This 6-pin power data cable is a power and data lead for older, legacy chartplotters and GPS displays. It’s listed as a C-Map cable and is a 6-pin Sitex power cable for legacy units. It’s new old stock. Because many older units used similar-looking plugs, please compare the connector in the photos with the socket on your unit before you order.

What you get

  • (1) 6-pin power data cable for legacy display units.
  • Condition: new old stock.
  • Nothing else is included.

Who needs a 6-pin power data cable

Older chartplotters and GPS units often still work perfectly, but their power cables get cut during refits, corrode at the plug or simply go missing. Without the right plug, the unit can’t be powered or connected to other equipment. A replacement 6-pin power data cable gets it running again. The data wires can also feed NMEA 0183 position data to a VHF radio or autopilot. Read about NMEA 0183 for how older units share data.

See more display cables and cables and connectors.

Before you install

  • Count the pins and compare the plug shape with your unit’s socket.
  • Check your unit’s manual for which wire is power, ground and data.
  • Fuse the power wire close to the battery or panel.
  • Use heat-shrink connectors on the bare ends.
  • Test the unit on the bench before final installation.

6-pin power data cable questions

Will it fit my unit?

Compare the photos with your socket, or email us your model and we’ll check.

Is it new?

It’s new old stock.

Buying older marine electronics with confidence

Older and discontinued parts keep a lot of boats running, but fit matters. Before you buy the 6-pin power data cable, compare part numbers, connectors and model names with what’s on your boat, and check the photos closely. We list what is included and what isn’t, and we note condition honestly. If you’re unsure whether it will work with your setup, send us your equipment list and we’ll help you check.

Shipping, returns and warranty

Shipping is free to the contiguous United States (lower 48). Hawaii, Alaska, Puerto Rico, other US territories and international orders have shipping calculated at checkout. Every order comes with 30-day returns and a 90-day warranty.

Questions about the 6-pin power data cable? Email sales@trollingmotorsdirect.org with your equipment details and we’ll help you check fit before you order.

Additional information

Location

1005607

error: Content is protected !!