Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Furuno DFF3 *SET OF 2 WAGO TRANSDUCER XDR Connectors w/ Depinning Tool* Orange

$20.99

These Furuno DFF3 WAGO connectors are the two orange connectors used for the transducer TAP settings on the Furuno DFF3 sounder module. The set includes both the high-frequency and low-frequency TAP connectors, plus the tool used to pin and depin them. Wire color may vary. The DFF3 connectors for the transducers themselves are sold separately. What you get (2) Furuno DFF3 WAGO TAP connectors, high and low frequency (1) pinning/depinning tool Why the Furuno DFF3 WAGO connectors matter The DFF3 can drive many different transducers, and the TAP connectors set the module’s output to match the transducer’s impedance. If these…

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

These Furuno DFF3 WAGO connectors are the two orange connectors used for the transducer TAP settings on the Furuno DFF3 sounder module. The set includes both the high-frequency and low-frequency TAP connectors, plus the tool used to pin and depin them. Wire color may vary. The DFF3 connectors for the transducers themselves are sold separately.

What you get

  • (2) Furuno DFF3 WAGO TAP connectors, high and low frequency
  • (1) pinning/depinning tool

Why the Furuno DFF3 WAGO connectors matter

The DFF3 can drive many different transducers, and the TAP connectors set the module’s output to match the transducer’s impedance. If these connectors are missing or wired wrong, performance suffers and the transducer could be damaged. These are commonly lost when a DFF3 is removed from one boat and installed on another. Search online for “Furuno TAP settings” to find the right setting for your transducer, or check the Furuno website.

See more cables and connectors and installation hardware.

Before you install

  • Look up the TAP settings for your transducer.
  • Use the included tool to move pins carefully.
  • Label high and low frequency connectors.
  • Power down the DFF3 before changing anything.
  • Test both frequencies afterward.

Furuno DFF3 WAGO connectors questions

Are the transducer connectors included?

No, they’re listed separately.

Is the tool included?

Yes.

Buying older marine electronics with confidence

Older and discontinued parts keep a lot of boats running, but fit matters. Before you buy the Furuno DFF3 WAGO connectors, compare part numbers, connectors and model names with what’s on your boat, and check the photos closely. We list what is included and what isn’t, and we note condition honestly. If you’re unsure whether it will work with your setup, send us your equipment list and we’ll help you check.

Why shop surplus and closeout parts

Surplus, closeout and new old stock parts let you repair or upgrade a boat for less than the cost of new equipment, and they keep useful gear out of the scrap pile. The Furuno DFF3 WAGO connectors is one of many hard-to-find parts we’ve collected from dealers, distributors and refits. Stock is limited, and once it’s gone we may not be able to get another one, so it’s worth ordering a spare when you find the part you need.

How we source and check our stock

Much of what we sell comes from dealer closeouts, installer inventories and boats being refitted with new electronics. Every Furuno DFF3 WAGO connectors listing is photographed as the actual item or a matching unit, and we describe the condition as plainly as we can, including scuffs, missing parts and whether it has been tested. If something in the photos or the description isn’t clear, ask us before you buy. We would rather answer a question than handle a return.

Shipping, returns and warranty

Shipping is free to the contiguous United States (lower 48). Hawaii, Alaska, Puerto Rico, other US territories and international orders have shipping calculated at checkout. Every order comes with 30-day returns and a 90-day warranty.

Questions about the Furuno DFF3 WAGO connectors? Email sales@trollingmotorsdirect.org with your equipment details and we’ll help you check fit before you order.

Additional information

Location

1024174

error: Content is protected !!