Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Airmar B17 Bronze Housing 33-100 for P17 insert, ST550 650 850 & Smart Sensors

$67.99

The Airmar B17 bronze housing, part 33-100, is a through-hull housing for the P17 insert, ST550, ST650 and ST850, and non-valved smart sensors. It’s new old stock and comes with the hull nut, rubber washer, blanking plug and the wire that holds the blanking plug. Please note that this housing has no valve. What you get (1) Airmar B17 bronze housing, 33-100 Hull nut, rubber washer, blanking plug and retaining wire Condition: new old stock. When to use an Airmar B17 bronze housing Speed and depth sensors are mounted through the hull in a housing, which lets you pull the…

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

The Airmar B17 bronze housing, part 33-100, is a through-hull housing for the P17 insert, ST550, ST650 and ST850, and non-valved smart sensors. It’s new old stock and comes with the hull nut, rubber washer, blanking plug and the wire that holds the blanking plug. Please note that this housing has no valve.

What you get

  • (1) Airmar B17 bronze housing, 33-100
  • Hull nut, rubber washer, blanking plug and retaining wire
  • Condition: new old stock.

When to use an Airmar B17 bronze housing

Speed and depth sensors are mounted through the hull in a housing, which lets you pull the sensor out for cleaning and fit the blanking plug in its place. If the old housing is corroded or the threads are damaged, it has to be replaced. Because the B17 has no valve, water comes in briefly when you swap the sensor for the plug, so do it quickly and keep the plug ready. See Airmar for fitting details.

See more transducer mounts and fairing blocks.

Before you install

  • Check your sensor is a non-valved model that fits a P17 housing.
  • Use a below-waterline sealant.
  • Tighten the hull nut firmly without crushing the core.
  • Use bronze only on fiberglass or wood hulls.
  • Practice the sensor swap before you launch.

Airmar B17 bronze housing questions

Does it have a valve?

No.

Does it include a sensor?

No. Housing, hull nut, washer and blanking plug only.

Why shop surplus and closeout parts

Surplus, closeout and new old stock parts let you repair or upgrade a boat for less than the cost of new equipment, and they keep useful gear out of the scrap pile. The Airmar B17 bronze housing is one of many hard-to-find parts we’ve collected from dealers, distributors and refits. Stock is limited, and once it’s gone we may not be able to get another one, so it’s worth ordering a spare when you find the part you need.

How we source and check our stock

Much of what we sell comes from dealer closeouts, installer inventories and boats being refitted with new electronics. Every Airmar B17 bronze housing listing is photographed as the actual item or a matching unit, and we describe the condition as plainly as we can, including scuffs, missing parts and whether it has been tested. If something in the photos or the description isn’t clear, ask us before you buy. We would rather answer a question than handle a return.

Buying older marine electronics with confidence

Older and discontinued parts keep a lot of boats running, but fit matters. Before you buy the Airmar B17 bronze housing, compare part numbers, connectors and model names with what’s on your boat, and check the photos closely. We list what is included and what isn’t, and we note condition honestly. If you’re unsure whether it will work with your setup, send us your equipment list and we’ll help you check.

Shipping, returns and warranty

Shipping is free to the contiguous United States (lower 48). Hawaii, Alaska, Puerto Rico, other US territories and international orders have shipping calculated at checkout. Every order comes with 30-day returns and a 90-day warranty.

Questions about the Airmar B17 bronze housing? Email sales@trollingmotorsdirect.org with your equipment details and we’ll help you check fit before you order.

Additional information

Location

2021510

error: Content is protected !!