Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Airmar SS164 SS264 SS175c Stainless Steel Hull Hold Down Nut – 02-136-01

$116.99

The Airmar 02-136-01 is a stainless steel hull hold-down nut for Airmar’s stainless through-hull transducers, including the SS164, SS264 and SS175C. It’s new old stock and includes the set screws that lock the nut in place. What you get (1) Airmar 02-136-01 stainless hull nut Locking set screws Condition: new old stock. Why you’d need the Airmar 02-136-01 The hull nut clamps a through-hull transducer tight against the hull and keeps it watertight. If the original was lost, damaged or cross-threaded during an install, or you’ve bought a transducer without its nut, you need the correct replacement. The set screws…

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

The Airmar 02-136-01 is a stainless steel hull hold-down nut for Airmar’s stainless through-hull transducers, including the SS164, SS264 and SS175C. It’s new old stock and includes the set screws that lock the nut in place.

What you get

  • (1) Airmar 02-136-01 stainless hull nut
  • Locking set screws
  • Condition: new old stock.

Why you’d need the Airmar 02-136-01

The hull nut clamps a through-hull transducer tight against the hull and keeps it watertight. If the original was lost, damaged or cross-threaded during an install, or you’ve bought a transducer without its nut, you need the correct replacement. The set screws stop the nut from backing off from vibration. See Airmar for torque specs.

See more transducer mounts and fairing blocks.

Before you install

  • Confirm your transducer is an SS164, SS264 or SS175C.
  • Clean the threads before fitting.
  • Tighten to Airmar’s recommended torque.
  • Lock with the set screws.
  • Check for leaks after launching.

Airmar 02-136-01 questions

Are set screws included?

Yes.

Is it new?

Yes, new old stock.

Why shop surplus and closeout parts

Surplus, closeout and new old stock parts let you repair or upgrade a boat for less than the cost of new equipment, and they keep useful gear out of the scrap pile. The Airmar 02-136-01 is one of many hard-to-find parts we’ve collected from dealers, distributors and refits. Stock is limited, and once it’s gone we may not be able to get another one, so it’s worth ordering a spare when you find the part you need.

How we source and check our stock

Much of what we sell comes from dealer closeouts, installer inventories and boats being refitted with new electronics. Every Airmar 02-136-01 listing is photographed as the actual item or a matching unit, and we describe the condition as plainly as we can, including scuffs, missing parts and whether it has been tested. If something in the photos or the description isn’t clear, ask us before you buy. We would rather answer a question than handle a return.

Buying older marine electronics with confidence

Older and discontinued parts keep a lot of boats running, but fit matters. Before you buy the Airmar 02-136-01, compare part numbers, connectors and model names with what’s on your boat, and check the photos closely. We list what is included and what isn’t, and we note condition honestly. If you’re unsure whether it will work with your setup, send us your equipment list and we’ll help you check.

Shipping, returns and warranty

Shipping is free to the contiguous United States (lower 48). Hawaii, Alaska, Puerto Rico, other US territories and international orders have shipping calculated at checkout. Every order comes with 30-day returns and a 90-day warranty.

Questions about the Airmar 02-136-01? Email sales@trollingmotorsdirect.org with your equipment details and we’ll help you check fit before you order.

Additional information

Location

1021705

error: Content is protected !!