Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Airmar P617V-DST800 DST810 Marine Thru-Hull Transducer Triducer Housing 33-510

$44.99

The Airmar P617V housing, part 33-510, is a valved replacement through-hull housing for the Airmar DST800 and DST810 smart triducers. It’s new old stock and includes the rubber hull washer and plastic hull nut. No other accessories are included. It has a valve, so it won’t directly replace a housing without one. What you get (1) Airmar P617V housing, 33-510, with valve Rubber hull washer and plastic hull nut Condition: new old stock. Why choose an Airmar P617V housing The DST800 and DST810 give depth, speed and temperature from a single through-hull. The valved housing closes automatically when you pull…

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

The Airmar P617V housing, part 33-510, is a valved replacement through-hull housing for the Airmar DST800 and DST810 smart triducers. It’s new old stock and includes the rubber hull washer and plastic hull nut. No other accessories are included. It has a valve, so it won’t directly replace a housing without one.

What you get

  • (1) Airmar P617V housing, 33-510, with valve
  • Rubber hull washer and plastic hull nut
  • Condition: new old stock.

Why choose an Airmar P617V housing

The DST800 and DST810 give depth, speed and temperature from a single through-hull. The valved housing closes automatically when you pull the sensor to clean it, so very little water comes in. That makes regular cleaning of the paddlewheel much easier and safer. If your old housing is cracked or leaking, this is the matching replacement. See Airmar for installation guides.

See more transducer mounts and fairing blocks.

Before you install

  • Confirm your sensor is a DST800 or DST810.
  • Check you want a valved housing.
  • Use below-waterline sealant.
  • Tighten the hull nut firmly.
  • Check for leaks after launching.

Airmar P617V housing questions

Will it replace a non-valved housing?

Not directly.

Is a sensor included?

No.

Why shop surplus and closeout parts

Surplus, closeout and new old stock parts let you repair or upgrade a boat for less than the cost of new equipment, and they keep useful gear out of the scrap pile. The Airmar P617V housing is one of many hard-to-find parts we’ve collected from dealers, distributors and refits. Stock is limited, and once it’s gone we may not be able to get another one, so it’s worth ordering a spare when you find the part you need.

How we source and check our stock

Much of what we sell comes from dealer closeouts, installer inventories and boats being refitted with new electronics. Every Airmar P617V housing listing is photographed as the actual item or a matching unit, and we describe the condition as plainly as we can, including scuffs, missing parts and whether it has been tested. If something in the photos or the description isn’t clear, ask us before you buy. We would rather answer a question than handle a return.

Buying older marine electronics with confidence

Older and discontinued parts keep a lot of boats running, but fit matters. Before you buy the Airmar P617V housing, compare part numbers, connectors and model names with what’s on your boat, and check the photos closely. We list what is included and what isn’t, and we note condition honestly. If you’re unsure whether it will work with your setup, send us your equipment list and we’ll help you check.

Shipping, returns and warranty

Free shipping to the contiguous 48 states. Shipping outside the continental US isn’t free, so please ask us for a quote first. 30-day returns and a 90-day warranty.

Questions about the Airmar P617V housing? Email sales@trollingmotorsdirect.org.

Additional information

Location

2008100

error: Content is protected !!