Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Airmar R209 R309 R509 3kw Transducer High Performance Fairing Block 04-648-02

$379.99

The Airmar 04-648-02 is a new, uncut high performance fairing block for the R209, R309 and R509 series of 3 kW transducers. These are extras collected from boatbuilders and installers, so they may have some dust from storage. They’re listed as blem because the narrow plastic lip on these blocks tends to chip in storage. Each has a small chip or two, no bigger than a third of a pinky fingernail, and most are hard to see. The chips have no effect on function or hydrodynamics. What you get (1) Airmar 04-648-02 high performance fairing block, uncut Condition: new, blem…

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

The Airmar 04-648-02 is a new, uncut high performance fairing block for the R209, R309 and R509 series of 3 kW transducers. These are extras collected from boatbuilders and installers, so they may have some dust from storage. They’re listed as blem because the narrow plastic lip on these blocks tends to chip in storage. Each has a small chip or two, no bigger than a third of a pinky fingernail, and most are hard to see. The chips have no effect on function or hydrodynamics.

What you get

  • (1) Airmar 04-648-02 high performance fairing block, uncut
  • Condition: new, blem (small chips).

Why use an Airmar 04-648-02

High-power R-series transducers are large, and on a hull with deadrise they need a fairing block to point straight down and keep clean water flowing over the face. The high performance block is shaped to reduce drag and turbulence at speed, which keeps the sonar picture clean when running. Airmar’s instructions call for sealant on all surfaces that touch the fairing, so once bedded, the small chips are covered anyway. See Airmar for installation guides.

See more fairing blocks and transducer mounts.

Before you install

  • Confirm your transducer is an R209, R309 or R509.
  • Measure deadrise and cut the block to match.
  • Bed all contact surfaces with sealant.
  • Align with the water flow.
  • Have a professional install high-power transducers.

Airmar 04-648-02 questions

Do the chips matter?

No. They don’t affect function or flow.

Is it cut?

No, it’s uncut.

Buying older marine electronics with confidence

Older and discontinued parts keep a lot of boats running, but fit matters. Before you buy the Airmar 04-648-02, compare part numbers, connectors and model names with what’s on your boat, and check the photos closely. We list what is included and what isn’t, and we note condition honestly. If you’re unsure whether it will work with your setup, send us your equipment list and we’ll help you check.

Why shop surplus and closeout parts

Surplus, closeout and new old stock parts let you repair or upgrade a boat for less than the cost of new equipment, and they keep useful gear out of the scrap pile. The Airmar 04-648-02 is one of many hard-to-find parts we’ve collected from dealers, distributors and refits. Stock is limited, and once it’s gone we may not be able to get another one, so it’s worth ordering a spare when you find the part you need.

How we source and check our stock

Much of what we sell comes from dealer closeouts, installer inventories and boats being refitted with new electronics. Every Airmar 04-648-02 listing is photographed as the actual item or a matching unit, and we describe the condition as plainly as we can, including scuffs, missing parts and whether it has been tested. If something in the photos or the description isn’t clear, ask us before you buy. We would rather answer a question than handle a return.

Shipping, returns and warranty

Shipping is free to the contiguous United States (lower 48). Hawaii, Alaska, Puerto Rico, other US territories and international orders have shipping calculated at checkout. Every order comes with 30-day returns and a 90-day warranty.

Questions about the Airmar 04-648-02? Email sales@trollingmotorsdirect.org with your equipment details and we’ll help you check fit before you order.

Additional information

Location

2018800

error: Content is protected !!