Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Raymarine E55052 – SeaTalk HS Cable High Speed Network 20M *New* – Free Shipping

$60.99

The Raymarine E55052 is a 20-meter SeaTalk HS high speed network cable. SeaTalk HS is the Ethernet-based network Raymarine used to share charts, radar, sonar and video between devices such as E-Series Classic and G-Series displays, DSM sonar modules and the SeaTalk HS network switch. This cable is new. It may or may not come in a factory sealed bag, but it has not been used. What you get (1) Raymarine E55052 SeaTalk HS network cable, 20 m (about 65 ft). Condition: new. Nothing else is included. Please see the photos. Where the Raymarine E55052 fits On a SeaTalk HS…

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns
SKU: 281583
Category:

Description

The Raymarine E55052 is a 20-meter SeaTalk HS high speed network cable. SeaTalk HS is the Ethernet-based network Raymarine used to share charts, radar, sonar and video between devices such as E-Series Classic and G-Series displays, DSM sonar modules and the SeaTalk HS network switch. This cable is new. It may or may not come in a factory sealed bag, but it has not been used.

What you get

  • (1) Raymarine E55052 SeaTalk HS network cable, 20 m (about 65 ft).
  • Condition: new.
  • Nothing else is included. Please see the photos.

Where the Raymarine E55052 fits

On a SeaTalk HS system, each display and sensor connects back to a network switch or directly to another display. A 20-meter length suits bigger boats: helm to flybridge, helm to a sonar module in the engine room, or across a wide console to a lower station. Using the proper Raymarine cable keeps the connectors sealed and the network stable, where a generic patch cable can let water in. Raymarine publishes network diagrams in its installation manuals if you need to plan the layout.

Need other lengths or parts? Browse our network cables.

Before you install

  • Confirm your devices use SeaTalk HS. Newer Raymarine gear uses RayNet, which needs an adapter cable.
  • Route the cable before tightening the connectors and avoid tight bends.
  • Keep it away from high-current wiring and VHF coax.
  • Leave a drip loop before the connector so water runs away from it.
  • Label both ends. It saves time when you troubleshoot later.

Why use a full 20-meter run

Joining two shorter cables adds connectors, and every connector is one more place for corrosion. A single 20-meter run gets data from one end of the boat to the other with only two connections, which makes the network more reliable and easier to diagnose. If 20 meters is more than you need, coil the extra loosely and secure it out of the way rather than leaving it loose in the bilge.

Raymarine E55052 questions

Does it work with RayNet?

Not directly. Raymarine sells adapter cables between SeaTalk HS and RayNet. Email us your models and we’ll point you to the right one.

Is it new?

Yes. It may not be in a sealed bag, but it’s new.

Shipping, returns and warranty

Shipping is free to the contiguous United States (lower 48). Hawaii, Alaska, Puerto Rico, other US territories and international orders have shipping calculated at checkout. Every order comes with 30-day returns and a 90-day warranty.

Questions about the Raymarine E55052? Email sales@trollingmotorsdirect.org with your equipment details and we’ll help you check fit before you order.

Additional information

Location

2013300

error: Content is protected !!