Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Garmin Flush Mount Hardware Kit for GPSmap 900 1000 1200 XS XSV Series *NEW*

$17.99

This Garmin flush mount hardware kit is for Garmin GPSMAP chartplotters including the 942xs, 922xs, 1042xsv, 1022xsv, 1022, 1042, 1242xsv and 1222xsv. It’s new. It may fit other models, but fit isn’t known or guaranteed beyond those listed. What you get (1) Garmin flush mount hardware kit Condition: new. Why use a Garmin flush mount hardware kit Flush mounting a GPSMAP 900, 1000 or 1200 series display gives a clean, built-in look and keeps the unit secure in rough water. The hardware clamps it into the panel from behind. If yours was lost when the display was removed, or you’re…

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

This Garmin flush mount hardware kit is for Garmin GPSMAP chartplotters including the 942xs, 922xs, 1042xsv, 1022xsv, 1022, 1042, 1242xsv and 1222xsv. It’s new. It may fit other models, but fit isn’t known or guaranteed beyond those listed.

What you get

  • (1) Garmin flush mount hardware kit
  • Condition: new.

Why use a Garmin flush mount hardware kit

Flush mounting a GPSMAP 900, 1000 or 1200 series display gives a clean, built-in look and keeps the unit secure in rough water. The hardware clamps it into the panel from behind. If yours was lost when the display was removed, or you’re switching from a bail mount to flush, this kit has what you need. See Garmin for templates and instructions.

See more flush mount hardware, gaskets and templates.

Before you install

  • Check your display is on the list.
  • Cut carefully using Garmin’s template.
  • Seal the cutout edge on fiberglass.
  • Tighten evenly.
  • Check the fit before closing up.

Garmin flush mount hardware kit questions

Does it fit the GPSMAP 1243xsv?

It’s listed for the models above. Email us about others.

Is it new?

Yes.

Why shop surplus and closeout parts

Surplus, closeout and new old stock parts let you repair or upgrade a boat for less than the cost of new equipment, and they keep useful gear out of the scrap pile. The Garmin flush mount hardware kit is one of many hard-to-find parts we’ve collected from dealers, distributors and refits. Stock is limited, and once it’s gone we may not be able to get another one, so it’s worth ordering a spare when you find the part you need.

How we source and check our stock

Much of what we sell comes from dealer closeouts, installer inventories and boats being refitted with new electronics. Every Garmin flush mount hardware kit listing is photographed as the actual item or a matching unit, and we describe the condition as plainly as we can, including scuffs, missing parts and whether it has been tested. If something in the photos or the description isn’t clear, ask us before you buy. We would rather answer a question than handle a return.

Buying older marine electronics with confidence

Older and discontinued parts keep a lot of boats running, but fit matters. Before you buy the Garmin flush mount hardware kit, compare part numbers, connectors and model names with what’s on your boat, and check the photos closely. We list what is included and what isn’t, and we note condition honestly. If you’re unsure whether it will work with your setup, send us your equipment list and we’ll help you check.

Shipping, returns and warranty

Shipping is free to the contiguous United States (lower 48). Hawaii, Alaska, Puerto Rico, other US territories and international orders have shipping calculated at checkout. Every order comes with 30-day returns and a 90-day warranty.

Questions about the Garmin flush mount hardware kit? Email sales@trollingmotorsdirect.org with your equipment details and we’ll help you check fit before you order.

Additional information

Location

1030170

error: Content is protected !!