Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Airmar FLUSH Race-Style Bronze Housing for P17 insert ST550 650 850 Smart Sensor

$63.99

This Airmar flush bronze housing is a race-style through-hull housing for the P17 insert and ST550, ST650 and ST850 smart sensors. It’s new old stock. “Flush” means the 2-inch hole is drilled and then tapered at the surface, so the bronze face sits level with the hull and doesn’t stick out at all. You get the housing and blanking plug with the hardware shown. No transducer is included. What you get (1) Airmar flush bronze housing, race style (1) blanking plug and hardware as pictured Condition: new old stock. No transducer. Why choose an Airmar flush bronze housing A standard…

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

This Airmar flush bronze housing is a race-style through-hull housing for the P17 insert and ST550, ST650 and ST850 smart sensors. It’s new old stock. “Flush” means the 2-inch hole is drilled and then tapered at the surface, so the bronze face sits level with the hull and doesn’t stick out at all. You get the housing and blanking plug with the hardware shown. No transducer is included.

What you get

  • (1) Airmar flush bronze housing, race style
  • (1) blanking plug and hardware as pictured
  • Condition: new old stock. No transducer.

Why choose an Airmar flush bronze housing

A standard housing has a lip that stands proud of the hull, which adds a small amount of drag and turbulence. On a race boat, every bit of drag counts, so performance sailors fair the hull and use flush housings instead. The flush face also gives the paddlewheel or sensor cleaner water flow, which can mean steadier speed readings. Bronze is the right material for wood and fiberglass hulls. See Airmar for installation guides.

See more transducer mounts and fairing blocks and accessories.

Before you install

  • Check your sensor fits the P17 housing.
  • Countersink the hole carefully to match the taper.
  • Bed the housing with a below-waterline marine sealant.
  • Don’t use bronze on aluminum hulls.
  • Keep the blanking plug on board for when the sensor is out.

Airmar flush bronze housing questions

Is a transducer included?

No. Just the housing, blanking plug and hardware.

Does it need special installation?

Yes, the hull hole must be tapered so the housing sits flush.

Buying older marine electronics with confidence

Older and discontinued parts keep a lot of boats running, but fit matters. Before you buy the Airmar flush bronze housing, compare part numbers, connectors and model names with what’s on your boat, and check the photos closely. We list what is included and what isn’t, and we note condition honestly. If you’re unsure whether it will work with your setup, send us your equipment list and we’ll help you check.

Why shop surplus and closeout parts

Surplus, closeout and new old stock parts let you repair or upgrade a boat for less than the cost of new equipment, and they keep useful gear out of the scrap pile. The Airmar flush bronze housing is one of many hard-to-find parts we’ve collected from dealers, distributors and refits. Stock is limited, and once it’s gone we may not be able to get another one, so it’s worth ordering a spare when you find the part you need.

How we source and check our stock

Much of what we sell comes from dealer closeouts, installer inventories and boats being refitted with new electronics. Every Airmar flush bronze housing listing is photographed as the actual item or a matching unit, and we describe the condition as plainly as we can, including scuffs, missing parts and whether it has been tested. If something in the photos or the description isn’t clear, ask us before you buy. We would rather answer a question than handle a return.

Shipping, returns and warranty

Shipping is free to the contiguous United States (lower 48). Hawaii, Alaska, Puerto Rico, other US territories and international orders have shipping calculated at checkout. Every order comes with 30-day returns and a 90-day warranty.

Questions about the Airmar flush bronze housing? Email sales@trollingmotorsdirect.org with your equipment details and we’ll help you check fit before you order.

Additional information

Location

1010306

error: Content is protected !!