Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Simrad NSS16 evo3/3s / B&G Zeus3 16 Edge Bezel Kit 000-13752-001 – *NEW*

$59.99

This Simrad NSS16 evo3 bezel kit, part 000-13752-001, is the edge trim panel set for the Simrad NSS16 evo3 and evo3S and the B&G Zeus3 16. It does not fit the evo2. These were left over from flat-mount “glass helm” acrylic installations and are new. Length: 17 1/16 inches. What you get (1) Simrad NSS16 evo3 edge bezel kit, 000-13752-001 Length: 17 1/16 in. Condition: new. Why replace an NSS16 evo3 bezel kit The edge trim gives a flush-mounted display a clean, finished look and hides the mounting hardware. Trim pieces crack or go missing when displays are removed for…

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns
SKU: 376312
Category: , ,

Description

This Simrad NSS16 evo3 bezel kit, part 000-13752-001, is the edge trim panel set for the Simrad NSS16 evo3 and evo3S and the B&G Zeus3 16. It does not fit the evo2. These were left over from flat-mount “glass helm” acrylic installations and are new. Length: 17 1/16 inches.

What you get

  • (1) Simrad NSS16 evo3 edge bezel kit, 000-13752-001
  • Length: 17 1/16 in.
  • Condition: new.

Why replace an NSS16 evo3 bezel kit

The edge trim gives a flush-mounted display a clean, finished look and hides the mounting hardware. Trim pieces crack or go missing when displays are removed for service. A new kit restores the look of your helm, especially on a glass-helm install. See Simrad or B&G for installation guides.

See more bezels, trim and suncovers.

Before you install

  • Confirm your display is an NSS16 evo3, evo3S or Zeus3 16.
  • Compare the length with your existing trim.
  • Clean the display edge first.
  • Press evenly so the clips seat.
  • Don’t use it on evo2 units.

NSS16 evo3 bezel kit questions

Will it fit an NSS16 evo2?

No.

Is it new?

Yes.

Why shop surplus and closeout parts

Surplus, closeout and new old stock parts let you repair or upgrade a boat for less than the cost of new equipment, and they keep useful gear out of the scrap pile. The NSS16 evo3 bezel kit is one of many hard-to-find parts we’ve collected from dealers, distributors and refits. Stock is limited, and once it’s gone we may not be able to get another one, so it’s worth ordering a spare when you find the part you need.

How we source and check our stock

Much of what we sell comes from dealer closeouts, installer inventories and boats being refitted with new electronics. Every NSS16 evo3 bezel kit listing is photographed as the actual item or a matching unit, and we describe the condition as plainly as we can, including scuffs, missing parts and whether it has been tested. If something in the photos or the description isn’t clear, ask us before you buy. We would rather answer a question than handle a return.

Buying older marine electronics with confidence

Older and discontinued parts keep a lot of boats running, but fit matters. Before you buy the NSS16 evo3 bezel kit, compare part numbers, connectors and model names with what’s on your boat, and check the photos closely. We list what is included and what isn’t, and we note condition honestly. If you’re unsure whether it will work with your setup, send us your equipment list and we’ll help you check.

Shipping, returns and warranty

Shipping is free to the contiguous United States (lower 48). Hawaii, Alaska, Puerto Rico, other US territories and international orders have shipping calculated at checkout. Every order comes with 30-day returns and a 90-day warranty.

Questions about the NSS16 evo3 bezel kit? Email sales@trollingmotorsdirect.org with your equipment details and we’ll help you check fit before you order.

Additional information

Location

1016601

error: Content is protected !!