Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Radarsonics 236 200 khz Transom Mount Transducer *NEW* 8 Pin Fuji Furuno Sitex

$53.99

The Radarsonics 236 is a 200 kHz transom-mount transducer with an 8-pin Fuji connector, used with Furuno, Sitex and other sounders. It’s new old stock. It measures 6 1/4 x 2 1/2 x 1 1/4 inches and comes with mounting brackets and hardware. What you get (1) Radarsonics 236 transducer, 200 kHz, 8-pin Fuji Mounting bracket and hardware Condition: new old stock. Why choose the Radarsonics 236 A 200 kHz transducer gives detailed returns in shallow and medium depths, which suits inshore fishing and coastal cruising. Transom mounting is simple and doesn’t require drilling through the hull below the waterline.…

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

The Radarsonics 236 is a 200 kHz transom-mount transducer with an 8-pin Fuji connector, used with Furuno, Sitex and other sounders. It’s new old stock. It measures 6 1/4 x 2 1/2 x 1 1/4 inches and comes with mounting brackets and hardware.

What you get

  • (1) Radarsonics 236 transducer, 200 kHz, 8-pin Fuji
  • Mounting bracket and hardware
  • Condition: new old stock.

Why choose the Radarsonics 236

A 200 kHz transducer gives detailed returns in shallow and medium depths, which suits inshore fishing and coastal cruising. Transom mounting is simple and doesn’t require drilling through the hull below the waterline. With the 8-pin Fuji connector, it plugs straight into compatible sounders. For background, see fishfinders.

See more single frequency transducers.

Before you install

  • Check your sounder uses a 200 kHz 8-pin Fuji transducer.
  • Mount it where water flows smoothly at speed.
  • Set the face slightly below the hull bottom.
  • Seal screw holes with marine sealant.
  • Test readings at different speeds.

Radarsonics 236 questions

Does it include a bracket?

Yes, with hardware.

Is it new?

Yes, new old stock.

How we source and check our stock

Much of what we sell comes from dealer closeouts, installer inventories and boats being refitted with new electronics. Every Radarsonics 236 listing is photographed as the actual item or a matching unit, and we describe the condition as plainly as we can, including scuffs, missing parts and whether it has been tested. If something in the photos or the description isn’t clear, ask us before you buy. We would rather answer a question than handle a return.

Buying older marine electronics with confidence

Older and discontinued parts keep a lot of boats running, but fit matters. Before you buy the Radarsonics 236, compare part numbers, connectors and model names with what’s on your boat, and check the photos closely. We list what is included and what isn’t, and we note condition honestly. If you’re unsure whether it will work with your setup, send us your equipment list and we’ll help you check.

Why shop surplus and closeout parts

Surplus, closeout and new old stock parts let you repair or upgrade a boat for less than the cost of new equipment, and they keep useful gear out of the scrap pile. The Radarsonics 236 is one of many hard-to-find parts we’ve collected from dealers, distributors and refits. Stock is limited, and once it’s gone we may not be able to get another one, so it’s worth ordering a spare when you find the part you need.

Shipping, returns and warranty

Free shipping in the United States. International orders can take up to 6 weeks. 30-day returns and a 90-day warranty.

Questions about the Radarsonics 236? Email sales@trollingmotorsdirect.org.

Additional information

Location

2021512

error: Content is protected !!