Description
This Standard Horizon GX1300S bracket is the mounting bracket with knobs for the Standard Horizon GX1300S VHF radio, and it’s also listed for the GX1200. It’s new old stock and may have light scuffs or marks from storage. The uprights are 5-1/16 inches apart, and the height to the center of the mounting hole is 2-3/8 inches.
What you get
- (1) Standard Horizon GX1300S bracket
- Knobs
- Uprights: 5-1/16 in apart. Hole center height: 2-3/8 in.
- Condition: new old stock.
Why buy a GX1300S bracket
A replacement bracket keeps your radio solidly mounted if the original cracked or the knobs went missing. It also lets you move the radio to a new spot without a panel cutout. The measurements help you confirm fit before ordering. See Standard Horizon for radio manuals.
See more VHF radio mounts and mounting brackets and accessories.
Before you install
- Compare the measurements with your radio.
- Use stainless fasteners and seal holes.
- Leave room for cables.
- Tighten knobs by hand.
- Do a radio check after mounting.
GX1300S bracket questions
Does it fit the GX1200?
It’s listed for both. Compare the measurements to be sure.
Are knobs included?
Yes.
How we source and check our stock
Much of what we sell comes from dealer closeouts, installer inventories and boats being refitted with new electronics. Every GX1300S bracket listing is photographed as the actual item or a matching unit, and we describe the condition as plainly as we can, including scuffs, missing parts and whether it has been tested. If something in the photos or the description isn’t clear, ask us before you buy. We would rather answer a question than handle a return.
Buying older marine electronics with confidence
Older and discontinued parts keep a lot of boats running, but fit matters. Before you buy the GX1300S bracket, compare part numbers, connectors and model names with what’s on your boat, and check the photos closely. We list what is included and what isn’t, and we note condition honestly. If you’re unsure whether it will work with your setup, send us your equipment list and we’ll help you check.
Why shop surplus and closeout parts
Surplus, closeout and new old stock parts let you repair or upgrade a boat for less than the cost of new equipment, and they keep useful gear out of the scrap pile. The GX1300S bracket is one of many hard-to-find parts we’ve collected from dealers, distributors and refits. Stock is limited, and once it’s gone we may not be able to get another one, so it’s worth ordering a spare when you find the part you need.
Shipping, returns and warranty
Shipping is free to the contiguous United States (lower 48). Hawaii, Alaska, Puerto Rico, other US territories and international orders have shipping calculated at checkout. Every order comes with 30-day returns and a 90-day warranty.
Questions about the GX1300S bracket? Email sales@trollingmotorsdirect.org with your equipment details and we’ll help you check fit before you order.





Standard Communications CMB16 Flush Mount System – NEW BLEM STOCK
Icom MB-69 Flush Mount Brackets for IC-M304 402 412 422 – NEW OPEN BOX
Garmin VHF 210 210i 215 215i AIS Mounting Bracket & Knobs *NEW* 010-12505-01



